How are Road Studs products, Henan Ruichen Traffic Equipment Co, Ltd. Road Studs products installed? Ruichen has more than ten years of rich industry experience in the traffic safety facility product industry. There are many products: LED traffic lights, tunnel guidance lights, lane lights, traffic countdown, traffic lights, LED fill lights, canopy lights, electronic police, vehicle Guide signs, tunnel electric signs, Road Studs and a series of traffic facilities products.
Ruichen lithium battery solar electric strobe light has set off a revolutionary change in the market, and many manufacturers have followed suit. As the leader of solar traffic safety facilities, Road Studs can be seen everywhere on the highway. In these potential safety hazards, Road Studs play a warning role to avoid traffic accidents and accidents, and are an indispensable traffic safety artifact on the road.
When many customers buy Road Studs in Ruichen, they will ask how to install them. As a professional manufacturer of Road Studs, Ruichen products are divided into two types: built-in solar panels and external solar panels.
Solar built-in installation method:
1. Put the base on the top of the light pole or bracket, and tighten the three fixing screws
2. Select the working mode according to specific needs (24 hours continuous work or light control 12 hours at night)
3. Turn on the power switch, the strobe light starts to work
How to install the solar panel externally:
1. Put the base on the top of the light pole or bracket, and tighten the three fixing screws
2. Install the external solar panel. The solar panel should be installed at an angle of 15° to the south, and the angle should be adjusted according to the sunlight on site, and the nut should be tightened
3. Select the working mode according to specific needs (24 hours continuous work or light control 12 hours at night)
4. Connect the solar panel plug to the waterproof plug on the top of the box and insert it firmly.
5. Turn on the power switch, Road Studs starts to work
