How to choose
Road Studs? For different road conditions, different luminous signs need to be selected to achieve the best warning and guidance effect.
Active
Road Studs should be set up in the following areas:
1. Inside the tunnel
2. Expressway small radius curve
3. Interchange small radius ramp
4. Near the gates of schools and hospitals
5. The main and secondary roads that are prone to "backlight" in the east-west direction.
6. Other road sections with potential traffic safety hazards
Active lighting
Road Studs should be set up in the following areas:
1. Intersections with poor sight distance or too large observation angle
2. The lighting conditions at night are not good, and there are hidden traffic safety road sections
3. Sections and intersections with complex background light sources on both sides of the road
4. Rapid downhill
5. Bridge on the ground road
Active
Road Studs can be set up in the following areas:
1. Commercial areas with poor lighting conditions or overexposed lighting on general urban roads at night (such as beside street lights, under large advertising light boxes, under projection lights, etc.)
2. Road sections and intersections with poor sight distance or too large viewing angle
