Solar Road Studs, powered by solar energy, work outdoors and are heavily influenced by natural factors. Long-term use, the battery board is too dusty or covered with snow in winter, the photoelectric conversion rate is reduced, the charging is insufficient, and the battery capacity is insufficient. Therefore, after installing
Solar Road Studs, we should regularly organize personnel to conduct a comprehensive and detailed inspection of the battery panels, so that the battery panels can run in good conditions for a long time, ensure the normal use of street lights, and create more economic benefits.
How/Steps for
Solar Road Studs:
1. Check whether the
Solar Road Studs battery board is damaged. It must be found and replaced in time.
2. Check whether the connecting wire of the
Solar Road Studs battery board and the ground wire are in good contact or not.
3. Check whether the
Solar Road Studs battery board bracket is loose or broken.
4. Check and clean the
Solar Road Studs battery panel and whether there are any coverings on the surface.
5. Check for bird droppings on the surface of
Solar Road Studs panels and clean up if necessary.
In addition to the cleaning and protection of the battery board, there are solutions to the maintenance of the
Solar Road Studs battery phalanx:
1. In case of strong wind, heavy rain, hail, heavy snow, etc., measures should be taken to protect the
Solar Road Studs battery array to avoid damage.
2. The lighting surface of the
Solar Road Studs battery array should be kept clean frequently. If there is dust or other dirt, it should be rinsed with water first, and then gently wipe the water with a clean gauze. Do not use hard objects or corrosive substances. Solvent flushing, probing.
3. The battery pack matched with the
Solar Road Studs battery array should be used in strict accordance with the use and maintenance methods of the battery.
4. Regularly check the wiring of the
Solar Road Studs electrical system to avoid loose wiring.
.jpg)
.jpg)
