At the peak of the rainy weather, the
Solar Studs are often protected, and preventing thunder and lightning from battling has changed the redundant task of covering the
Solar Studs. How does
LED Solar Studs prevent lightning strikes? Ruichen will introduce to you the most effective ways to prevent
Solar Studs from being damaged by lightning:
1. Install lightning protection area
In addition to the power supply facilities, the
LED Solar Stud will also install some communication facilities to control the switches and brightness of the
Solar Stud. The facilities and power supply of the department need to be installed in the lightning protection area to protect the sea area. The electromagnetic field here is much weaker.
2. Lightning protection and other flood level connections
In order to completely eliminate the destructive flood level difference caused by lightning, power lines, signal lines, non-metallic ballistics, etc. should be connected to the flood level with overvoltage shields, and all the interfaces of the inner shielding areas should also stop all floods. All equal flood level connections shall be connected to each other and initially connected to the main equal flood level.
3. The internal lightning protection of
Solar Stud is combined with the external lightning protection
At present, the interior of the normal
LED Solar Stud is made of superconductor material, which is equivalent to a lightning rod. It is envisaged that the bottom line and the ground grid must be installed. The system forms an internal lightning protection system. This system can prevent the
LED Solar Stud from causing fire and personal safety accidents due to direct lightning strikes. External lightning protection system means that the outside of the
Solar Stud protects the facility by grounding, installing voltage protection, etc. This system can prevent the intrusion of inductive lightning and other forms of over-voltage, resulting in power failure, which is not guaranteed by the internal lightning protection system of
Solar Stud. The two are opposites and complement each other. The external lightning protection system should be connected to the internal lightning protection system or installed overvoltage protectors on many parts such as shells, wires in the income and expenditure protection area, non-metallic ballistics, etc., and should be connected to wait for the flood level.
4.
High-quality Solar Stud shielding facilities - lightning protection module and overvoltage shielding module
The function of the
Solar Stud lightning arrester is to connect the protected system into the flood level system within the longest time (nanosecond level), so that each port of the facility is equal to the flood level. At the same time, the huge pulse energy generated by the lightning strike in the passage is released to the ground through the short road, and the flood level difference at each interface end of the installation is increased, thus playing the role of protecting the
Solar Stud installation.
