Solar Warning Lights are mainly used in dangerous areas where there are potential traffic safety hazards on the highway to remind drivers or pedestrians to pay attention, and effectively play a warning role to avoid traffic accidents and accidents. Such as highway intersections, curves, bridges, roadside village intersections, school entrances, residential quarters, factory gate lights dangerous areas.
When many customers buy Solar Warning Lights in Ruichen, they will ask how to install them. As a professional manufacturer of Solar Warning Lights, RuichenSolar Warning Lights can be divided into two types: built-in solar panel and external solar panel.
Solar Warning Lights embedded installation method:
1. Put the base on the top of the light pole or bracket, and tighten the three fixing screws.
2. Select the working mode according to specific needs (24-hour continuous work or light-controlled 12-hour work at night).
3. Turn on the power switch, the strobe light starts to work.
External installation method of solar panel:
1. Put the base on the top of the light pole or bracket, and tighten the three fixing screws.
2. Install the external solar panel. The solar panel should be installed at an angle of 15° to the south, and adjust the angle according to the on-site sunlight and tighten the nut.
3. Select the working mode according to specific needs (24-hour continuous work or light-controlled 12-hour work at night).
4. Connect the solar panel plug to the waterproof plug above the box firmly.
5. Turn on the power switch, Solar Warning Lights starts to work.
