Traffic Road Studs is an important transportation facility for traffic management. If we want to play its role to a greater extent, we must choose the number of traffic
Road Studs to be installed according to the real situation of different intersections. It cannot be said that it is set according to local habits or personal preferences, which may cause traffic congestion to become more serious. So do you know how many
traffic Road Studs at the intersection is reasonable? The following Fama Traffic will introduce to you:
Rationalization of the number of traffic Road Studs installed at intersections:
1. Corresponding to an entrance at an intersection, one or more
traffic Road Studs groups can be installed as required.
2. When a correctly channelized triangular diversion island is set at the intersection, in general, traffic
Road Studs columns should be set on the diversion island.
3. When the distance between the entrance parking line and the opposite Road Studs is relatively large, the opposite
Road Studs should use a signal light with a transparent surface size of the luminous unit with a diameter of 400mm.
4. When the right-turn arrow
Road Studs of the motor vehicle right-turn diversion island are set up, the right-turn arrow signal light group can be directly installed on the right-turn diversion island.
5.
Road Studs at the bridge span of the overpass are installed on the bridge body or on the right side of the entrance lane; if there is a secondary parking line under the overpass, a signal light group should be added on the other side of the overpass.
6. For roads without motor vehicle lanes and non-motor vehicle lane separation belts, the road studs poles for the opposite traffic should be installed near the tangent point of the curb. When the road is wide, it can be installed on the sidewalk on the right side of the road with a cantilever.
7. Set up
Road Studs at the roundabout to control the vehicles entering and leaving the roundabout. Set up a
Road Studs group in the roundabout to indicate the motor vehicles entering the roundabout, and set up a signal light group on the outer layer of the roundabout to indicate the motor vehicles entering the roundabout.
8. When there is a left-turn waiting area at the intersection under the bridge or a large level crossing, if it is difficult for vehicles entering the left-turn waiting area to observe the change of the opposite signal light on your side, it is advisable to wait for the left turn A left turn arrow
Road Studs group is added on the opposite side of the turning area.
9. For roads with separation strips for motorized lanes and non-motorized lanes, if the width of the separation strips allows, the opposite traffic signal light pole should be installed within 2m behind the tangent point of the edge of the non-motorized separation strip. When the road is wide, it can be installed in the isolation belt on the right side of the road with a cantilever type, and a
Road Studs group can also be added in the non-isolation belt on the left side according to the needs. When the road is narrow, it can be installed in the isolation belt on both sides of the road by column type;
Regarding the question of how many traffic Road Studs at intersections are reasonable, today the editor of
Henan Ruichen Traffic Equipment Co, Ltd. will introduce you here. Only a reasonable number of traffic
Road Studs installations can provide convenience for traffic management, so that people can enjoy smoother, faster, and safer traffic guarantees, and truly live a more convenient, comfortable, and better modern urban life.
