Uses:
Reflective Road Studs and deceleration
Road Studs are attached to concrete pavement, asphalt pavement, and metal barriers for anchoring; plastic and metal road studs are available. Component: A and B two components, the weight mixing ratio A:B=1:1.
Features: high bonding strength, fast curing time, aging resistance, impact resistance, water resistance, freeze-thaw resistance.
Dosage: About 30
Road Studs can be pasted per kilogram of glue.
Road Studs paste construction process: paste surface treatment → preparation of structural adhesive → gluing and paste → curing and maintenance of paste surface treatment. Use an angle grinder to remove the surface layer with a thickness of 1-2mm to a solid base, wipe the surface with a cotton cloth dipped in acetone, and keep it dry.
Larger depressions can be repaired with Changan
Road Studs glue.
Road Studs should be pasted to avoid expansion joints on the road.
Road Studs surfaces should also be clean and dry. Main equipment used: angle grinder, grinding disc, cotton cloth, dust mask. Compounding glue: Changan brand
Road Studs glue is composed of two components, A and B. Mechanical stirring should be used for preparation. The agitator can be composed of an electric hammer and a stirring tooth. A small amount (within 0.5 kg) can also be manually stirred with Φ6 and Φ8 thin steel bars.
(Note: only use a greasy knife to mix, it cannot guarantee even mixing). Take a clean container (plastic or metal basin, free of oil, water, impurities) and weighing scales and mix them according to the mixing ratio, and stir with a mixer for about 10 minutes until components A and B are evenly mixed. When stirring, it is best to stir in the same direction, and try to avoid mixing air to form air bubbles. The amount of glue dispensed each time should not be too much, and it is used now. Main utensils used: mixer, container, weighing apparatus, greasy knife, gloves. Glue and paste: After the adhesive is prepared, use a greasy knife to spread it evenly on the road surface or the
road studs. should.
