The southern coast is a typhoon-prone area, so
install Solar Road Studs on both sides of urban roads, especially pay attention to high-grade
Solar Road Studs that are windproof and rainproof. A few days ago, the fourth typhoon "Hagupit" made landfall from Zhejiang, and the central wind force reached 13 when it landed.
After the typhoon, we often see some trees damaged due to the typhoon breaking or even falling, which seriously affects people's personal safety and traffic. Similarly, the LED street lights and
Solar Road Studs on both sides of the road will also be damaged by the typhoon. Faced with danger, and street lights are more directly fatal due to broken people or vehicles, how
Solar Road Studs and LED street lights resist typhoons has become a big deal.
How can outdoor lighting equipment such as LED street lights and
Solar Road Studs resist typhoons? Relatively speaking, the higher the height, the greater the force. When encountering strong winds, a 10-meter street light is usually more likely to break than a 5-meter street light. , but it does not say to avoid installing taller street lights, and one of the fundamental reasons is related to the product itself. Compared with LED street lights, the wind resistance design has higher requirements on
Solar Road Studs, because LED street lights have one more solar panel than
Solar Road Studs, so more attention should be paid to wind resistance.
For
Solar Road Studs, typhoon resistance should be started from three aspects: first, the foundation should be deeply buried, and the ground cage should be used for burying. This is to strengthen the connection between the street lamp and the ground, and prevent the street lamp from being pulled or knocked down by strong winds. Secondly, avoid taking shortcuts and thicken the material of the light pole. In order to save the material of the light pole, the possible risk is that the light pole is half-folded, because the light pole is made too thin, and the height of the light pole is relatively high, so It can be easily broken, and the
Solar Road Studs must be able to withstand at least a Category 12 typhoon, and most of the north can withstand a Category 10 wind. Finally, the reinforcement of the solar panel bracket is very important, because the solar panel is easily blown off because it is not directly affected by external force, so a material with high hardness must be used. Therefore, the protection of LED
Solar Road Studs only needs to do the first three steps.
