The
tunnel active solar cat eye road stud, also known as photoelectric raised road sign, is a clear, eye-catching and adjustable line of sight guidance sign with active flashing LED light. Continuous layout of active solar cat eye road stud forms the contour line of luminous lane, which not only plays an excellent and obvious role in guiding and warning, but also adds beautiful scenery to it. It is mainly installed on the roadside or tunnel wall of expressway, tunnel, approach shoulder, roundabout, safety island and underground parking lot.
First, the install position should be determined in installation drawings. According to the proper installation height of solar cat eye road stud, the installation position shall be determined first. When measuring the height, the formed reference object shall be used as the measurement basis (such as the completed or preliminary completed tunnel pavement, etc.). Draw a horizontal installation reference line to ensure that the installation height of lamps is consistent.
Then, drilling and installation of the active solar cat eye road stud based on the hole position on both sides. And fill the blue into the drilled hole. The ratio of glue A and glue B is 1:0.7, and then 15% - 30% cement is added as filler. Mix the colloid evenly. Each active solar cat eye road stud needs about 30-40 grams of glue.
The surface of the installation position should be cleaned. Use a spatula to smear glues on the back of the solar cat eye road stud. Put the solar cat eye road stud wire through the hole drilled in advance. Put it in the fixed position, and tighten both sides with a cross screw driver at the same time.
After installation, clean up the spilled glue around the
solar cat eye road stud with a spatula.
.jpg)
.jpg)
