Solar road stud is a common way of traffic barrier, which is used to guide people to drive in the right direction, prevent speeding and traffic accidents.
Solar road stud is mainly used in highways and railways. Generally, the height of raised road stud shall not exceed 25mm. There are many kinds of reflectors in the solar road studs, including reflectors, reflective beads, reflective films, etc.
The
solar road stud can play an important role in road safety. But if it is not installed properly, the road stud may lose its original function and even threaten the driving safety. There are several common problems in the
installation of solar road stud.
1. Install on the marking line. The marking line is also a kind of resin material, and it is attached to the ground, and its connection with the ground is limited. If the solar road stud is installed on the marking line, the impact force of the road stud is completely transferred to the marking line. In this way, the raised solar road stud is easy to be impacted off, and the marking line will also be glued off.
2. Uneven installation position of solar road stud. The direct result of this is that the force on the solar road stud is uneven, and the pressure on the road stud is almost concentrated in the convex and concave parts. If you encounter a large tonnage vehicle, the raised road stud is easy to crack.
3. The installation position of solar road stud is not clean. The firmness of the solar road stud depends on the close combination of the
road stud, glue and the ground. If the installation position is not clean, the dust will absorb most of the adhesive force, resulting in the weak bonding of the solar road stud, and it is easy to fall off when subjected to external force impact.
