The
function and use place of solar road studs are various. Installation of solar road studs requires the following preparation steps.
First, prepare the tools for
installing solar road studs. The tools needed to install solar road stud are measuring wheel and marker, core drill, core drill, drill or hammer and chisel, dry and wet vacuum cleaner, fixative, Baijiu and no flannelette, glue, high-energy visibility jacket and trousers, safety shoes, gloves, goggles / safety glasses, ear protectors and so on.
Second, it is necessary to set up complete safety equipment to protect the safety of solar road stud installation personnel. It is not only required to temporarily close the road when installing the
solar road stud, but also to set up a warning device near the road to avoid vehicles entering. The solar road stud installation personnel need to wear reflective vest to remind the vehicle.
These are the preparations for the installation of sola road stud. After the completion of these works, we can actually install the solar road stud according to the drawings.
Solar road stud should be installed on these places:
1. Dangerous blind corners and sharp-curves, black spots and poorly lit areas.
2. Areas with unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.).
3. Joint intersections, on and off ramps, center lines and dividers.
4. entrance warnings, carpool lanes, bridges, cross and side walks
5. Taxiways at airports,
RUICHEN ultra-thin solar road stud can be installed in bike and pedestrian lanes, aboard ships and watercrafts.
6. Entertainment areas, parking lots, hotel entrances and gas stations etc.
7. Guidance lines, traffic islands, roundabouts and mountain roads.
