Solar Studs are well done, and they need to stick well. In 1994, I didn’t know what glue to use to stick them. Even if I used epoxy resin, I didn’t know that it was good. I also failed for this. It fell off during installation, and I was very sad. Later, after repeated research, finally the glue passed the test, so that the asphalt would fall off and the glue would not open. We joked: our
Solar Studs glue, pull up the radish and bring up the mud, so this time In the revision of the standard, I strongly recommend that the physical properties of the glue be formulated. There are also requirements for the glue in ASTM4280. During the installation, if the glue is not good, everything is over.
Unless you change
Solar Studs every year like in the United States, do not use asphalt glue as an adhesive. The advantage of asphalt glue is that it can quickly repair
Solar Studs on roads that have been opened to traffic, but not in China. I have the best asphalt glue in the United States. Used, no, the characteristics of asphalt, when it is hot, it softens, not to mention sticking to
Solar Studs, and China is overloaded and frequently changing lanes are so serious, so do not use asphalt glue to stick
Solar Studs in China, otherwise it will wait for you It can only be a hundred reasons to be sad.
1996 - How many heroes at one time
The market in the 1990s can be said to be dominated by foreign companies. The more well-known ones are 3M (US), stimsonite (US), ray-o-lite (US), and swareflex (Austria).
The difference between them is that the
Solar Studs reflector emits light differently. 3M, stimsonite, and ray-o-lite are all micro-pyramid reflectors, while swareflex uses lens reflectors. In terms of initial brightness, the micro-pyramid reflector has high brightness , In terms of reflector wear resistance, swareflex's radiator has more advantages. In terms of shell material and installation method, swareflex's cast aluminum
Solar Studs structure with nail feet is more suitable for domestic conditions.
The same point is: they are both rigorous and reputable companies. Among American companies, stimsonite's 911 model has a wear-resistant protective layer on the radiator, which is technically ahead of the other two. At that time, I was with swareflex. We cooperated, imported 43-bead reflectors from Austria, and produced the shells by myself. At that time, half of the Swarovski
Solar Studs in the country were matched by me. I produced the shells and used their reflectors.
The technical difficulty here is that the reflector does not fall off. We solved this problem after a brief labor pain.
Swarovski
Solar Studs is an Austrian brand
Solar Studs. He is a respected enterprise. He has brought new ideas to China in the field of traffic safety facilities, which is reflected in the following aspects:
(1) In 1986,
Solar Studs was installed in Jinpanling Tunnel, Guangdong, and the concept of
Solar Studs was introduced into China;
(2) The first to introduce elastic single-piece column delineators into China;
(3) The first to introduce rubber speed bumps into China, I can't think of it, now the speed bumps all over the street, the originator is Schwarfax;
(4) The first to introduce the split lane body into China;
(5) The first to introduce tunnel
LED Solar Studs into China.
