The Working Mode of Solar Synchronous Cat Eye Road Studs

Solar synchronous cat eye road studs refer to the synchronous lighting or non lighting of the cat eye road studs in a certain road section. The solar cat eye road stud can be set to night mode or 24-hour mode, controlled by two switches. One is the master switch to control the whole cat eye road stud on and off, the other switch is the solar cat eye road stud control mode, which can select night mode or 24-hour mode.
 
The solar synchronous cat eye road stud control system sends commands to the main control through the control management computer, and then the main control system sends signals to the sub control (solar cat eye road stud). When the sub control receives the order to start or not to work, the information received and transmitted between the sub controls is hand in hand. 
The distance between the two auxiliary control shall not exceed 150m. But if the distance between the main control and the first sub control exceeds 150m, the command still can be accepted. As long as the distance between the two adjacent sub control does not exceed 150m, the sub control can be extended infinitely and can receive the command sent by the main control.
 
The solar synchronous cat eye road stud adopts the light control mode, that is, it is not on during the day and on at night. If the weather of the day or a certain period of time is haze or rainy, the command to turn on the solar cat eye road studs can be sent to the general control through the computer, and the solar cat eye road stud will be on. 
If the operator does not set the time, the solar cat eye road stud will remain open until the next day. The solar cat eye road stud will be automatically closed through its own light control mode, and will be automatically opened again at night.