In recent years, with the development of society, expressway construction has become more and more important, and we have paid more attention to emergency safety in tunnels. It can be seen that the formulation of a fire emergency plan is very useful for expressway managers. necessary. So how should we consider how to prevent and reduce the losses caused by tunnel fires?
To prevent and reduce the losses caused by tunnel fires, we can consider the following aspects:
(1) First of all, a reasonable design of the tunnel should be carried out. Tunnel Traffic Signs and tunnel induction lights should be installed in the tunnel, and the most effective safety measures should be worked out according to various situations of fire and the corresponding principles.
(2) The second is to set up emergency facilities to ensure the convenience, effectiveness, preventiveness and systematicness of these facilities.
(3) Make tunnel drivers realize the importance of their behavior through information publicity and the cooperation of various departments. It is necessary to install the tunnel emergency stop belt Traffic Signs in the tunnel. When the vehicle has a problem, drive into the tunnel emergency stop belt in time. According to the tunnel fire equipment indication signs, you can find the fire extinguisher immediately, so that the primary fire can be extinguished in the first time. To avoid major accidents and early accidents, you can also escape from the dangerous place according to the tunnel evacuation signs, and then call for firefighting according to the prompts of the tunnel emergency Traffic Signs.
Installation and Application of Tunnel Electro-optical Traffic Signs
Emergency telephone Traffic Signs should be installed above the emergency telephone, and the installation height clearance should not be less than 2.5m.
Firefighting equipment instructions Traffic Signs should be set above the fire hydrants, and the installation height clearance should not be greater than 2.5m.
The pedestrian crossing indicates that Traffic Signs should be installed on the top of the pedestrian crossing, and the installation height clearance should not be greater than 2.5m.
Traffic Signs should be installed at the left side of the traffic hole in the driving direction, and the installation height clearance should not be less than 2.5m.
Emergency parking belt Traffic Signs should be set about 5m in front of the emergency parking belt, and the installation height clearance should not be less than 2.5m.
The evacuation indication signs shall be set on the side wall of the tunnel, the installation height clearance shall not be greater than 1.3m, and the spacing shall not be greater than 50m.
When installing, you should pay attention to the bracket form of the photoelectric Traffic Signs, because the wind load of the vehicle is very large, all fixations must be firm. Be sure to consult a professional when installing.
my country's expressway construction is developing rapidly, and our road tunnels are getting longer and longer. It can be said that tunnel traffic has become an indispensable "green channel" in people's lives. Most of the data show that the probability of safety accidents in tunnels still accounts for The ratio is not small, and Tuoan Technology here warmly reminds our general public: In the case of LED Traffic Signs and LED tunnel electric signs, if a traffic accident occurs, please follow the instructions of the tunnel electric signs installed in the tunnel to escape. The tunnel evacuation sign at this time is the guiding light of our life.
