Solar Studs are very common these days, and cities, towns, and villages are installing
Solar Studs one after another.
Solar Studs is not only simple in equipment, but also does not need to lay wires, saves manpower and material resources, saves wiring costs, and does not use mains electricity, saving electricity and money, and there is no suspicion of power outages. However,
Solar Studs are greatly affected by the climate and environment, and will also show damage, which requires our attention.
One is the influence of climate.
In summer, there are many convective climates, and in the event of strong winds, heavy rainfall and other harsh conditions, pay attention to observe the sealing function of all
Solar Studs, whether there are cracks in the lines or ground cracks. After all, once the
led Solar Studs line encounters water, it will definitely fail. .
The second is the influence of trees.
Many people will ask about the impact of trees. Now the country pays more attention to landscaping, which has led to many led
Solar Studs projects to follow up with corresponding tree landscaping projects, but this project was simplified due to the strong summer weather. , these trees were toppled and could cause direct damage to the
led Solar Studs foundation.
The countermeasure is to follow up the corresponding tree pruning and planting operations to ensure the stability of the trees, and to a large extent reduce the damage caused by tree fall to
Solar Studs when there are strong storms in summer.
The third is the effect of temperature.
If the
led Solar Studs in the village are exposed to the sun in the summer, if there is a shower, it is necessary to check and protect them on time. The impact of lightning on the
led Solar Studs in summer also exists. Make sure the
led Solar Studs are working properly.
The fourth is the battery.
The placement of the battery pack should be ventilated and anti-theft, so it is generally installed in the base of the
Solar Studs. When the
Solar Studs is running normally, the charging and discharging process of the battery pack should be frequently observed, and the electrodes or wiring of the
Solar Studs should be checked at any time for corrosion. , If this phenomenon occurs, it should be dealt with in time to avoid unnecessary major mistakes.
The fifth is the influence of dust.
The surface of the
Solar Studs panel should be kept clean frequently. If there is dust or other dirt, the manufacturer of
Solar Studs recommends that it should be rinsed with water first, and then gently wiped with a clean gauze. Do not rinse with hard objects or corrosive solvents.
