1.A comprehensive understanding of the characteristics of
Solar Traffic Light lamps, light sources, and light poles, according to the actual road and reference lighting standards, combined with investment budget, reasonable selection of solar lamps, light sources, and light poles to give full play to the high efficiency and energy saving of light sources. The advantages of light distribution and accessories combination.
2. Under the condition of guaranteed lighting performance, appropriately increase the spacing of
Solar Traffic Light lamps to save the number of lamps; appropriately increase the height of
Solar Traffic Light lamp poles to improve the lighting effect; Save engineering costs.
3. Combined with road engineering, timely intervention in pole position selection, foundation construction and pre-buried in advance, so as to find problems in time, make reasonable changes, ensure quality and save investment.
4. According to the actual and geological conditions of the
Solar Traffic Light project site, design and manufacture the
Solar Traffic Light light pole foundation and high pole light foundation to ensure that the foundation is firm and reliable. Special attention should be paid to the fitting of the pre-embedded bolts with the reserved holes of the rod seat, accurate positioning, reasonable pre-embedded length and external length, and proper protection of the threaded part to facilitate hoisting and positioning.
5. In rock formations and weathered stone areas, it is difficult to meet the requirements of scattered grounding and segmented grounding. It can be considered that the conductors such as galvanized flat steel according to the design requirements are connected through long, reliable connection, and appropriate protection treatment should be applied at the same time. The foundation is reliably connected to ensure that each
Solar Traffic Light pole is reliably connected to the ground.
Solar Traffic Light medium and high pole lights are scattered and mainly rely on basic grounding. When necessary, a resistance reducing agent should be used to reduce the grounding resistance.
6. The hoisting operation must strictly abide by the operating rules. Special attention should be paid to the power grid lines and other lines around the hoisting equipment, as well as the surrounding structures. The hoisting points should be reasonable during hoisting, and should be adjusted in time after positioning.
7. Pay attention to the beauty of the
Solar Traffic Light pole after installation. Starting from the foundation construction, the light position should be controlled by the main line, and the linearity should be changed reasonably according to the road design. . The inclination of the cantilever of the
Solar Traffic Light pole should keep the direction and angle coordinated.
8. The connectors of the internal accessories of the
Solar Traffic Light should be inserted tightly and firmly to avoid failure caused by loose wind swing and poor contact. Solar Traffic Light fixtures are securely fastened to poles, poles and cantilevers. Each pole of
Solar Traffic Light mid-to-high pole light should be assembled in place, the lifting frame and lamps should be reliably fixed, the lifting system should be safe and reliable, and the functions of lifting, limiting and positioning should be complete.
