De hecho, en los paises desarrollados en el extranjero, el habito de observar las marcas durante el dia y ver los “tachuelos de la carretera” por la noche se ha formado durante mucho tiempo. Los pernos de carretera solar incorporados de ruichen se producen de acuerdo con una serie de estandares de diseno y han obtenido inspecciones de seguridad. Los tachuelos de carretera tradicionales tienen defectos como apariencia simple, emisor de luz solo por pelicula reflectante, tamano de base pequeno, rendimiento de fijacion deficiente, incapacidad para soportar el rodamiento, la pelicula reflectante no puede emitir activamente la luz y el efecto de advertencia deficiente. Sin embargo, los tachos de la carretera solar incorporados personalizados por el departamento de materiales de Jingkai Tengda tienen una apariencia hermosa, que se puede utilizar para fines de orientacion y decoracion de carreteras.

Henan Ruichen Tachas Solares hechas de marco de aluminio Tachas Solares pueden soportar un mayor impacto. Resistencia a la compresion de 20 toneladas. Curva de borde liso, puede amortiguar mejor el compresor del neumatico. Tambien se puede colocar en la carretera, jardin, parque industrial y otros lugares. Buen efecto anti-presion. Henan Ruichen Solar Road utiliza paneles solares flexibles mejor que los paneles solares tradicionales, que pueden estar doblados. Bajo consumo de energia y larga vida util. Los solares de tachas recien desarrollados de Henan Ruichen tienen 6 LED ultra-luminosos con un rango visible de mas de 800 metros. Puede soportar un mayor impacto, y puede resistir la corrosion durante mucho tiempo. Resistencia a la compresion de 10 toneladas. La curva es suave y no se pueden acumular bordes afilados al compresor del neumatico.

Upon disconnecting and reconnecting the battery cable, the Solar Road Studs light will illuminate. After a day of charging, the controller notices that the battery’s capacity is not being increased by its float voltage, which is its recovery voltage in the event that the load is unplugged.

Batteries made with lithium In place of conventional road studs, Solar Studs use ultra-bright LED solar studs as the light source, crystalline silicon solar panels as the power source, and an intelligent charge and discharge controller to regulate everything.

In addition, the insulating paint layer of the wire was broken during installation, and the wire was conducted through the light pole, causing a short circuit, the battery board was short-circuited and not charged, the battery was short-circuited and sparked, and the Solar Road Studs lamps were short-circuited and did not light up.

LED Road Studs light source can not work normally when the battery voltage is normal. If the light is not on, you can directly connect the positive and negative poles of the lamp to the positive and negative poles of the battery to check. If the light source can light up, it means Road Studs The lamp is good, the Road Studs controller does not supply power to the load, and the controller has problems. This phenomenon is that the battery voltage is not enough after a long time in cloudy and rainy days.

After five years of use, the lithium battery powering the Solar Stud Lights will have less capacity, which will cause the light to go out earlier or on wet days to last shorter. This is typical.

Panels for solar stud lights: A loose connection will prevent the solar panel from charging correctly. When a voltmeter test is performed, the typical open circuit voltage is more than 17.5V, yet no current flows through the circuit. The cause of this phenomenon is that the solder joints on the Solar Stud Lights panel are either cold or not firmly attached.

Road Studs Controller: Solar Stud Reflectors Controller Detection RED LIGHT The Solar Stud Reflectors Controller is charging with a tiny pulse current when the On light is on, the Red light flashing when the battery is full. Solar Stud Reflectors Controller Yellow Light: This light indicates that the battery is running low and is unable to function properly.

Batteries made with lithium To replace conventional solar street lights, Led Solar Studs use ultra-bright Led Solar Studs as the light source, crystalline silicon solar panels as the power source, and an intelligent charge and discharge controller.

Since solar energy is abundant in nature, it can be used anywhere there is sunlight. Because of this, solar stud reflectors are particularly well-suited for outdoor lighting in high-end residential areas, industrial development zones, coastal landscape lighting, illuminating tourist attractions, and lighting up businesses like colleges and universities.

Energy-saving LED solar studs: solar photovoltaic conversion produces endless amounts of electricity;
Protection of the environment: no radiation, noise, or pollution;
Safety of Led Solar Studs: no mishaps like electric shock and fire;

The product’s unique technical features include its extremely high power, brightness comparable to 150W–250W incandescent lamps, 8 hours of illumination per day, and the ability to continue operating normally during 3–5 days of continuous rainy weather.

It is referred to as a “green product” since it can be put on-site without causing environmental pollution, provided there is enough sunshine. A wind-resistant design incorporates the lamp pole and battery assembly, and microcomputer light time control and intelligent charging and discharging are integrated within. Products made with high-efficiency lighting sources, such as led solar studs, have a long service life, are simple to install, operate steadily and dependably, don’t require cables, and don’t use conventional energy.

Place the battery within the battery box and attach the connection wire to the Solar Studs controller in accordance with the technical specifications; connect the battery, load, and solar panel in that order. During the connection process, take care to ensure that each wire is connected correctly to the terminal indicated on the Solar Studs controller. The positive and negative poles must not come into contact with one another or be connected in reverse for the controller to not be harmed.

Prior to installing Solar Studs, make sure the light source is functioning properly, the lamp head is accurately attached, and all fasteners are tight. Next, make sure the light source is operational and the basic debugging system is operating correctly by loosening the solar panel’s connecting line on the controller.

How are LED solar studs installed? I think a lot of people are interested in knowing the answer to this. Ruichen hopes to ease everyone’s problems by bringing the installation guide for LED solar studs today.

1. Intersections with low sight distance or excessively large viewing angle.
2. Road segments that pose a risk to traffic safety and have inadequate nighttime lighting.
3. Road segments and crosswalks featuring intricate backdrop lighting sources on both sides of the street.

Solar studs next to hospital and school entrances.
East-west main and subsidiary routes that are vulnerable to “backlighting”.
Other areas where there are risks to road safety.

The blue light that LED Solar Road Studs emit is harmful to the human retina, so prolonged exposure to it can cause vision impairments, including more severe vision problems in certain programs. This is one of the drawbacks of using LED Solar Road Studs.

Fast working speed: LED Solar Stud Reflectors are safer since the filament of energy-saving bulbs quickly turns black and breaks down if they are switched on and off frequently.

LED solar studs are widely available. What are its benefits and drawbacks in relation to regular lamps? You’ll learn how from Ruichen.

When it comes to lighting options, Solar Stud Lights may produce several optical lighting options on the same shape that are appropriate for various roads; all that is required is the replacement of lighting lenses that are the same size but different sizes.

Specifically, in recent years, it has been increasingly clear that outdoor smart solar stud reflectors are becoming more and more modular. The benefits of modularization are well advanced when considering ease of manufacture, ease of assembly, and ease of replacement.

Following fluorescent, high-pressure gas, and incandescent bulbs as energy-efficient lighting options, LED solar stud reflectors are considered by several nations to be the direction of future lighting product development. LED Solar Stud Reflectors are designed to be versatile and modular, offering multiple functions.

Now, let’s discuss the heat sink. When operating, LED solar stud reflectors will produce heat. The LED will be harmed if the heat is not released in a timely manner. As a result, a heat sink is required. The foam plastic that is currently available is typically an aluminum heat sink, meaning that although it feels plastic, it actually contains an aluminum layer.

Now, let’s discuss the light source board. The majority of LED solar stud lights on the market today are welded to aluminum substrates. The lamps’ color temperature is typically set to be lower than 6000k. It is similar to the color temperature of roughly 3000k, which is yellowish like the sun rising in the morning, in European and American countries

Energy-saving lightbulbs are no longer relevant in this era. LED solar studs are now used in nearly every home. On the other hand, there are numerous varieties of LED solar lamps available. The driver, light source, and heat sink are the three components that make up an LED solar stud. First, let’s discuss the driver. Typically, non-isolated drivers are used in residential LED solar studs.

Most surge voltages that happen close to thunder are harmful. When the voltage is set, they can all function. For instance, the Solar Stud Light in my nation will fluctuate as long as the voltage fluctuation is not too great for 220V bulbs. As such, the input voltage range is something you need to consider when buying a Solar Stud Light.

The driver, light source, and heat sink are the three components that make up an LED solar stud. First, let’s discuss the driver. Typically, non-isolated drivers are used in residential LED solar studs. This kind of driver is reasonably priced, highly efficient, dependable, and able to function normally even in the presence of voltage fluctuations.

Three components make up LED Solar Road Studs: the driver, the light source, and the heat sink. First, let’s discuss the driver. Home LED Solar Road Studs typically have non-isolated drivers. This kind of driver is very reliable, highly efficient, and reasonably priced.

The features of both bright and reflecting solar road studs are combined in the Combined Solar Stud Reflector. This is a brand-new kind of solar road stud that was created recently