Solar Road Studs

LED Solar Studs system composition: LED Solar Studs is an independent power generation system. It can independently convert solar energy into electric energy, and convert electric energy into heat energy for lighting and decoration, without the need for wire transmission.

It is suitable for the beautification and lighting of green grass in residential communities and the beautification of park lawns. The structure of LED Road Studs is composed of solar cell components (photovoltaic panels), super bright LED lights (light source), maintenance-free rechargeable batteries, automatic control circuits, lamps, etc.

LED Road Studs mainly use the energy of solar cells to work. When the sun shines on the solar cells during the day, the light energy is converted into electrical energy and stored in the battery. ) Provide power. Its advantages are mainly safety, energy saving, convenience, environmental protection and so on.

Cats Eyes Road Studs light source and power supply system design methods have developed rapidly in recent years due to the unique advantages of Cats Eyes Road Studs. Lawn lights have low power, mainly for decoration, and are suitable for places with high mobility requirements, difficult circuit laying, and high waterproof requirements.

Cats Eyes Road Studs are mainly used to brighten and decorate lighting. They are designed with high-brightness LED light-emitting diodes. They have the advantages of high brightness, easy installation, reliable work, no cables, no conventional energy consumption, and long service life.

The Cats Eyes Road Studs uses high-efficiency monocrystalline silicon solar cell modules, which can convert sunlight and light energy into electrical energy during the day and store it in the battery.

LED Cats Eyes Road Studs is a new type of green energy landscape lighting fixture that integrates energy saving, environmental protection, lighting and beautification. Cats Eyes Road Studs are energy-saving, environmentally friendly, safe and beautiful.

Therefore, the capacitive Cats Eyes Road Studs have very demanding requirements for the actual use environment, not only sunlight It is strong enough, and there can be no continuous rainy weather, otherwise it will be difficult to work normally.

If the battery matching performance is not good, there will be insufficient battery storage power in the rainy weather, causing the Cats Eyes Road Studs to fail to emit light. In this way, Cats Eyes Road Studs has no practical value and cannot be used at all. This is the limitation of capacitive Cats Eyes Road Studs.

This is because the photoelectric conversion rate of monocrystalline silicon solar panels is relatively high, about 14%, which can convert solar energy into electrical energy to the greatest extent to ensure that Cats Eyes Road Studs are working. Energy supply. In addition, the solar panel must be a high-hardness, wear-resistant circuit board. Solar panels have to withstand the crushing and wear of wheels every day.

It can be said to be the first link in the entire working system of Cats Eyes Road Studs; its work efficiency directly determines the work efficiency of Cats Eyes Road Studs High and low. Nowadays, monocrystalline silicon solar panels are commonly used.

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud for highway
, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud for farm
, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud for expressway
, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud for Driveway
, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud for airport
, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud company
, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-C1,
Name:Embedded Rreflective solar road stud with stem
, Power supply:High Efficient Solar Panel(2.5V/0.3W ),
Load capacity:30tons static, Battery:NI-MH 600mah(high temperature resistance),
Material:Aluminium+PC, Water proof:IP68, road stud solar LED:Ultra bright diameter 10mm(4pcs or 6pcs),
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>1000m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Packaging & Delivery:
Selling Units:Single item, Single package size: 13X13X5.7 cm, Single gross weight:1.000 kg,
Package Type:IP68 waterproof LiFePO4 battery road safety lights,
24pcs/ctn, weight: 17kgs, carton size: 43*25*28CM/57*41*23.5CM.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Embedded Rreflective solar road stud with spike
, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

The outbreak period of the entire lighting industry began three years ago at the Xiamen BRICS Summit, which spent 3 billion to upgrade the urban landscape road. Subsequently, a series of major events such as Hangzhou G20, Qingdao SCO Summit, and the 40th anniversary of Shenzhen’s reform and opening up were held. Hosting has resulted in the government investing a lot of money to light up the city. In addition to the promotion of major commemorative activities, the increasing urbanization rate and the increase of new urban areas have led to the rapid development of the corresponding landscape Cats Eyes Road Studs lighting project.

According to the requirements of the relevant technical standards of the Ministry of Transport, the compression index of Solar Road Studs must reach more than 10 tons. Compression resistance is the most basic condition for Solar Road Studs to work properly. The Solar Road Studs surface shell produced by Henan Ruichen Traffic Equipment Co, Ltd. is made of high-compression PC bulletproof material to enhance the compression resistance of its electronic components; some reinforcing ribs are designed on the shell to share the electronic components.

According to the construction plan and the actual construction progress on the site, the required equipment will be transported to the Road Studs construction site by car as soon as possible, and sufficient testing equipment will be equipped. And do a good job in the application for the start of construction, and coordinate with the owner, the supervision engineer, other construction units, and the locality. In order to achieve the high-quality and efficient completion of this project, our company has selected a batch of relatively new, good-performance construction machinery and equipment suitable for the project for production and construction according to the characteristics and needs of the project, and its Carry out necessary debugging and maintenance to keep it in a good condition, and organize entry and exit in a planned way according to construction arrangements to reduce environmental pollution.

RuiChen Reflective Studs are composed of A and B components. Mechanical stirring should be used for the preparation. The stirrer can be composed of electric hammer and stirring teeth. The stirring teeth can be made of cross-shaped Φ steel bars welded to the end of the electric hammer bit. Small amounts (means less than 0.5 kg) can also be manually stirred with Φ6 and Φ8 thin steel rods. (Note: Only use a knives for mixing, it cannot be guaranteed to be evenly mixed). Take a clean container (plastic or metal basin, free of oil, water, impurities) and weighing scale to mix according to the proportion, and stir with a stirrer for about 10 minutes until the A and B components are evenly mixed. It is best to stir in the same direction when stirring, and try to avoid mixing air to form bubbles. The amount of glue should not be too much each time, and use it now. The main equipment used: agitator, container, weighing apparatus, knives, gloves.

The installation of Solar Cats Eyes Road Studs helps the driver to see the signs and markings clearly, especially at night, which has a warning effect. Using Solar Cats Eyes Road Studs not only has a beautifying effect, but also makes urban road traffic signs more international.
The installation of Solar Cats Eyes Road Studs has played a very good role in protecting the safety of pedestrians crossing the road. When pedestrians are crossing the road, if they cannot cross the street once, they can stop here and wait for the second opportunity to cross the street. Also reminded Pedestrians and the state of civilized traffic do not require motor vehicles to unilaterally make people, but pedestrians and motor vehicles give way to each other.

With the rapid development of road construction, especially expressway construction in recent years, people’s awareness of road safety has become stronger and more humane. As a traffic safety Peugeot, Cats Eyes Road Studs is widely used on domestic high-grade highways and municipal roads. Compared with ordinary Road Studs, Cats Eyes Road Studs have better visual effects. Cats Eyes Road Studs are made of die-cast aluminum as the shell, solar cells are used as charging components, and nickel-metal hydride batteries (in some high-end products, also Other batteries, such as lithium iron phosphate batteries, are used as energy storage components, and new road stud products that use LED light-emitting or combined with passive light-emitting are mostly used on highways. (According to the requirements of the Ministry of Transport: the compression resistance of solar road stud lights should be greater than 100KN).

Road Studs should use a wire not less than the distribution phase wire as the ground wire to connect the metal shell of the lamp or lamp post, and the ground wire is connected to the “ground” of the system. When the length of the grounding wire exceeds 25 meters, repeat the grounding at the end. For repeated grounding, you can bury a 4mmx40mm, 25-meter-long galvanized flat iron with 5 grounding electrodes. The grounding electrode uses 5×50 galvanized angle steel and is 2.5 meters long. , Vertically driven into the ground, the grounding electrode and galvanized flat iron are welded at a distance, and the grounding resistance is required to be less than 4 ohms. The grounding electrode of the light pole must be welded firmly, and the joint should be tinned. When connecting the PE protection wire of the street light power supply to the ground wire of the light pole, the top must be pressed with a spring washer and then the nut must be screwed on. For example, when it is larger than 25 meters, we need to do a repeated grounding at the end. Then, for repeated grounding, a 4mmx40mm, 25-meter-long galvanized flat iron needs to be buried, and 5 grounding electrodes are also needed. After being driven into the ground vertically, welding is carried out.

As an emerging green energy, solar energy has been quickly promoted and applied with its unparalleled advantages. As the fourth-generation new light source, it has been effectively used in urban lighting and beautification, road lighting, courtyard lighting, indoor lighting and other lighting and applications in various fields. Especially in remote areas without electricity, Cats Eyes Road Studs has a wider application prospect.

The tunnel Cats Eyes Road Studs should have the properties of high efficiency, energy saving, waterproof, dustproof, earthquake resistance and corrosion resistance. Beautiful appearance, easy installation and maintenance. The technical performance of Cats Eyes Road Studs (such as enclosure protection grade, corrosion resistance grade, electric shock protection, etc.) meets the technical performance requirements of this design.

Road Studs mainly refers to a traffic safety facility. Protruding road signs with scientific names are mainly installed in the middle of the road markings or in the middle of the double yellow lines to remind the driver to drive in the lane through its retroreflective performance.
The installation of Road Studs generally adopts epoxy resin installation.
At night, the outline of the road can be clearly drawn with the help of car lights. Play a good visual inducing effect.

Reflective Studs damage is mainly caused by insufficient strength of the materials used in Reflective Studs. Reflective Studs will be subjected to static pressure load and impact load during actual use. The static pressure load is mainly formed by the tires pressing on the Reflective Studs when the vehicle is stationary; the impact load is mainly generated when the tires run over the Reflective Studs while the vehicle is running.
　　Improving the static compressive strength of Reflective Studs is mainly achieved by increasing the strength of Reflective Studs. At present, the Reflective Studs sold on the domestic market are divided into metal Reflective Studs (such as aluminum stud body Reflective Studs) and engineering plastic Reflective Studs (such as polycarbonate, polyacrylic acid and other materials). ) And mixed material Reflective Studs (such as road studs with engineering plastic shell + quartz sand filling). Among them, Reflective Studs made of metal have the highest compressive strength, followed by Reflective Studs made of engineering plastics and mixed materials.

Most people think that energy-saving lamps can save energy by 4\/5 is a great innovation, but LED is more energy-saving than energy-saving lamps by 1\/4, which is a great innovation of solid-state light sources. In addition, LED also has the advantages of high light quality, basically no radiation, reliability and durability, and extremely low maintenance costs. It is a typical green lighting source. The successful development of the ultra-bright LED Solar Road Studs has greatly reduced the cost of using Solar Road Studs, making it reach or close to the cost quotation of the initial installation of the power frequency AC lighting system, and it has environmental protection, easy installation, safe operation, economical and energy-saving Etc. Due to the advantages of high light efficiency and low heat generation, LEDs have been increasingly used in the field of lighting and are showing a trend to replace traditional lighting sources.

Regarding the material of Reflective Studs, considering that the deformation of Road Studs’ reflective sheet material will reduce the reflective performance of the road stud, we adopted a reflective sheet made of polycarbonate material with a small deformation coefficient and good weather resistance. Regarding the material of Road Studs, in order to reduce the failure of Road Studs, we have considered the use of metal Road Studs, and then considered that the unit price of metal Road Studs is higher, and the service life of metal Road Studs is much longer than that of engineering. The service life of plastic road studs, and one of the road studs and road studs fails, and the road studs need to be replaced. The use of metal road studs does not extend the overall effective service life of the road studs, so Road Studs is selected The road stud body is made of the same polycarbonate material as the road stud.

(1) First, use a ruler to determine the installation position, install one at 15m, (install according to the drawing), ensure that each position is longitudinally in a straight line, and at the same time horizontally aligned left and right, the installation distance shall be subject to the design requirements.
　　(2) (Installation of Road Studs with feet) Use an electric hammer with a diameter of ∮22mm to drill holes. The depth of the hole is 10mm longer than the nail feet of Road Studs. After drilling the hole, blow the dust out of the drilled hole.
(3) The ratio of glue is 1:0.7 for glue A and glue B, and then add 15%-30% cement as a filler (the glue is not easy to mix too much at a time, enough for one person to stick 50-70 road studs. glue). The colloid should be stirred evenly, and the color (hand electric drill with agitator) should be consistent. Each road stud needs about 40-50 grams of glue for bonding.

There are square and round Solar Stud Lights, which are widely used in shopping malls, parking lots, green belts, parks, tourist attractions, residential quarters, urban sculptures, pedestrian streets, building steps and other places. They are mainly buried in the ground. It is used for decoration or indicating lighting. Some Solar Stud Lights are also used for washing walls or illuminating trees, and their application has considerable flexibility.

Double luminous protection. The reflective brightness of ordinary guardrail signs is only 300-400 MCD, and the reflected light can only be emitted when the car lights are illuminated. If there is a layer of dust on the guardrail signs in foggy weather, it will greatly affect the instructions that the guardrail lights should have effect. Too Road Stud Lights can both actively illuminate and emit light. Its luminous brightness can reach more than 2000 MCD, which is more than 5 times the former; such high-intensity light can penetrate rain, fog and dust at night.

First, use a ruler to determine the installation position of the Road Studs, install a Road Studs at 15m, (install according to the drawings), ensure that the positions are longitudinally in a straight line, and at the same time horizontally aligned left and right. The installation distance shall be subject to the design requirements.
The ratio of glue is 1:0.7 glue A and glue B, and then add 15%-30% cement as a filler (the glue is not easy to mix too much at a time, enough for one person to glue 50-70 road studs). The colloid should be stirred evenly, and the color (hand electric drill with agitator) should be consistent. Each road stud needs about 40-50 grams of glue for bonding.

In addition, based on the analysis of the failure causes of Road Studs, it is proposed to Road Studs that the body of Road Studs must be made of a single material, which has good compressive strength and impact resistance. The shape of the Road Studs should be able to meet the bonding strength with the road surface or effectively reduce the lateral shear force that acts on the road studs when the vehicle is rolled: The Road Studs sheet must have a wear-resistant coating: The reflective structure of the Road Studs sheet can effectively prevent Road Studs The impact of local damage of the film on the overall brightness of the reflective film and other requirements.

What are the ways and causes of the destruction of Motorway Studs?

Improving the static compressive strength of Road Studs is mainly achieved by increasing the strength of Road Studs material. At present, the Road Studs sold in the domestic market are divided into metal material Road Studs (such as aluminum Road Studs), engineering plastic material Road Studs (such as engineering plastic Road Studs made of polycarbonate, polyacrylic acid, etc.) and mixed materials. Road Studs (such as Road Studs with engineering plastic shell + quartz sand filling). Among them, Road Studs made of metal have the highest compressive strength, followed by Road Studs made of engineering plastics and mixed materials.

With the widespread application of road studs in domestic high-grade highways and municipal roads, the quality and service life of Solar Road Studs have received more attention. In the actual application process, Solar Road Studs are often damaged and the service life is reduced due to installation problems.

several road cones, 2 sets of construction diversion cards, baton and reflective clothing for each person. Before departure, everyone must wear reflective clothing, and the construction signs and road cones must be placed at the construction site. (Workers have to do: don’t laugh, don’t fight, obey instructions, and not drink alcohol 6 hours before going on the road), each team has 2-4 security guards.

Stainless steel panel, Road Studs is made of high-purity aluminum alloy material, the surface is electrostatic sprayed, cured at constant temperature, and strong adhesion. Road Studs have the characteristics of waterproof, dustproof, novel structure, high efficiency and energy saving, and long service life. Road Studs are suitable for lighting decoration in places such as street courtyard lawns, sidewalks, and courtyard walks.

Solar Road Studs have a long life span and are environmentally friendly. At present, the average trouble-free working time of the power-type self-illumination that can be purchased is more than 50,000 hours; if it works 12 hours a day, it can be used for ten years. Almost all of its waste can be recycled. This not only saves energy, but also saves resources and protects the environment. When other light sources are discarded, they will pollute the environment. Especially when fluorescent lamps are discarded, the mercury in the lamps will cause serious pollution to the environment and water sources.

Protruding road signs, also known as road studs. It is a protruding marking block fixed on the road surface to serve as a marking. It can be used to mark the center line, lane dividing line, and edge line on expressways or other roads; it can also be used to mark curves, entrance and exit ramps, and diversion markings. , Road narrowing, road obstacles and other dangerous sections.

Use a brush to clean the location where Solar Road Studs are installed, and make sure that the installation location is dry.

Basically, the Road Stud Lights that we can see on the street are customized products. In the process of beautifying some cities, such Road Stud Lights will also be integrated into the characteristics of some cities. Customized products are required to complete the whole So we must first understand the customization steps and methods of Road Stud Lights, and also understand the specific customization steps.

Solar Studs is a new type of led Solar Studs that is made of cast aluminum lamp body and 12mm tempered glass material, and is used in parks, squares, and street decorations. It has the characteristics of small size, low power consumption, long service life, sturdiness and durability, low power consumption, long service life, easy installation, chic and elegant shape, leakage prevention, and waterproof.
　　Solar Studs are widely used in green belts, park lighting projects, parks, lawns, courtyard lighting, pedestrian streets, parking lots, square night lighting, building main decoration bridges, and road lighting.
　　Solar Studs has a long life, no accidents and almost no need to replace Solar Studs, one construction, several years of use, low power consumption, no need to pay high electricity bills for lighting and beautification.

Nowadays, there are more and more types of Solar Studs lamps, most of the functions are used for decoration, and there are even special atmosphere lamps. The original admirable lighting demand has now been reduced a lot, and the use of electric lamps has become more and more extensive. The same is true for the development of the underwater Solar Studs in the swimming pool. From the beginning, it only needed to illuminate the underwater and increase the field of vision. Nowadays, the colorful Solar Studs are used to render the pool water and fountains to form the Solar Studs landscape. The scope of the underwater Solar Studs is also step by step. The expansion of LED underwater Solar Studs is now the mainstream. Because of the rich color temperature of LEDSolar Studs light source, flexible control of RGB and even RGBW, coupled with its advantages of energy saving, environmental protection, durability, etc., LED underwater Solar Studs are now very popular.

Solar Road Stud can achieve no flicker, no ultraviolet rays, extremely low heat radiation, and no harm to human eyes. Solar Road Stud is very suitable for indoor lighting or lighting where people need to work and study for a long time. In the part of luminous efficiency, because the traditional light source is a 360° radial light source, some of the light is not used effectively, so the traditional light source The luminous efficiency of the one-way lighting lamps used in the use of the light refraction loss is as high as 30% or more. Unlike traditional light sources, the self-luminous one-way light source is 180°, and the light emitted can be fully utilized.

Find the right business. After all, the production of products such as Solar Road Studs requires high technical level, so it is necessary to find a suitable merchant to cooperate and determine the production capacity of the other party. It is best to choose a larger-scale business that can provide us with multiple services to cooperate. This can ensure a smoother customization process and also ensure that the overall quality of Solar Road Studs meets the requirements. Determine the design style. We must also have certain design requirements for Solar Road Studs, so we must first understand the style of good design, as well as our own needs and so on. It depends on the design ability of the other party and whether the basic design and processing can be completed according to our requirements.

Road Stud solar light source can achieve no flicker, no ultraviolet rays, extremely low heat radiation, and no harm to human eyes. The solar light source Road Stud is suitable for indoor lighting or lighting in places where people need to work and study for a long time. In terms of luminous efficiency, because the traditional light source is a 360° radial light source, some of the light is not used effectively, so the traditional light source The luminous efficiency of the one-way lighting fixtures has a light refraction loss of more than 30% in use. Unlike traditional light sources, the self-luminous 180°one-way light source can fully utilize the light emitted.

Solar studs can illuminate the ground to make the landscape more beautiful and make people safer when walking at night.
　　1. Generally, high-purity aluminum alloy materials are used, and aluminum alloy materials have the characteristics of high temperature resistance, high dust resistance, and high water resistance;
　　2. Before installation, the power must be cut off;
　　3. The embedded parts can isolate the main body and the soil, which can ensure the service life of the solar studs;
　　4. LED road studs are one of the most used types of road studs. Its biggest feature is the long life of the light source, which can reach more than 50,000 hours, and the colors are rich and gorgeous. LED road studs also have the characteristics of easy control, variable color, high brightness, low energy consumption, soft light, no glare and high lamp efficiency.

It is necessary to consider the construction and planning of the city, and on the basis of a full understanding of the city’s natural landscape, cultural history, and folk customs, how to use Solar Road Studs to create night scene effects that are both artistic, innovative and feasible.
The brightness and color of Solar Road Studs light should be considered. The landscape lighting of Solar Road Studs in the city should be human text. The light of Solar Road Studs needs mild colors and soft colors to enhance the night atmosphere while not stimulating and generating people.

The operation and maintenance of the Solar Studs lighting project must comply with energy-saving standards. On the premise of satisfying the lighting effect, each share of energy should be used rationally to reduce energy consumption and costs. Generally speaking, Solar Stud Lights is the better choice, using clean energy to reduce energy consumption and environmental pollution. For example, in Changsha’s Juzizhoutou and Martyrs’ Park, the Solar Stud products of Henan Ruichen Traffic Equipment Co, Ltd. are used. The lamps have soft light and use solar energy, which is a clean energy source, to illuminate, which has no burden on the environment.

Solar studs are in accordance with GB/T29195 “General Specification for Crystalline Silicon Solar Cells for Ground Use”, GB/T19813-2005 “Solar Protruding Standards”, JT/T817-2011 “General Technical Requirements and Testing Methods for Sound Design of Highway Electromechanical Systems”, GB/T -24725-2009 “Protruding Road Signs” and other standards designed and produced, and obtained safety inspections.
　　Traditional road studs have defects such as poor quality, unbearable rolling, easy to wear out, poor warning effect, and insignificant warning effect.

At the same time, it is also a wonderful landscape facility during the day. Lawn Road Studs are easy to install and have a strong decorative style. They are often used in parks, garden villas, square greening and other places.
The role of Road Studs
　　The role of Lawn Road Studs is to add safety and beauty to the green landscape with the appearance and soft lighting, and at the same time serve as a beautiful Road Studs landscape facility buried on the lawn during the day. There are many styles of lawn Road Studs, and they are designed according to different installation environments, such as imitation stone lawn Road Studs, solar lawn Road Studs, led lawn Road Studs, craft lawn Road Studs, European-style lawn Road Studs, etc. Buried in the lawn, it looks as beautiful as a sculpture.

What is Road Studs? Road Studs is widely used in the field of scientific and technological lighting in my country. It is named Road Studs because it is buried on the ground for people to illuminate. The lamp body is generally round, square, rectangular, arc-shaped, and the color is more gorgeous. Colorful.
　　Road Studs is a new type of Road Studs with super bright solar energy storage self-luminous material as the light source and constant current drive of solar energy storage self-luminous material. It is to bury the Road Studs underground, but with the help of the super bright light source of the power supply, the buildings on the ground will be more beautiful.

Solar Studs lamp is one of the common outdoor lamps. Because it is generally installed under the ground, it is also called underground Solar Studs lamp. It is mostly used in large shopping malls, squares, parks, commercial buildings and other places, which can save space and create colorful night lighting for architectural places.
The buried Solar Studs lamp is sturdy and durable, with low power consumption, long life, small size, easy installation and so on. Under no accidents, the light source of the buried Solar Studs lamp can be used for several years, and the shell can be used for at least 20 years under non-man-made environments.

Solar Road Studs guide people the way. Clearly indicate the destination of the road, the destination of each intersecting road, and the location and distance of scenic spots along the way. Standardize traffic behavior. Solar Road Studs is also used as a basis for driver and pedestrian law-abiding and traffic police enforcement.

In general, Solar Studs is still quite good. The above is about “What are the advantages of rural Solar Studs”. It can be seen that Solar Studs is still quite good and can be widely used in rural roads!Many rural roads are now equipped with Road Studs to better remind pedestrians and drivers. So what are the advantages of this rural Road Studs? Let Ruichen Group help you answer them.

For example, the Road Studs lights in the fountains in the scenic area are mainly used for music fountains. The Road Studs lights keep changing colors following the music and the beating of the fountain. , In order to achieve a better visual effect and make the whole fountain show more perfect.

In addition to the current mainstream online purchase of Reflective Studs channels, there are also traditional offline channels. After you get our contact information, you can come to China, Henan, Anyang, and visit our factory. Generally, you can choose a more suitable Reflective Studs. Another advantage of buying offline is that you can directly see the quality of the product and determine whether you need to buy it! Then we can help customers ship to the designated port.

To test the protection level of solar studs underwater, keep the reflective studs continuously immersed under a certain pressure. This definition is rather vague. In fact, the test equipment, test conditions and test time of the reflective studs IP68 waterproof rating should be recognized by both the supplier and the buyer, and its severity is naturally higher than any of the following levels.

Support sample customization and individual customization.The workshop of the professional solar road stud manufacturer is very tidy, clean and bright. In this way, the employees are also very happy.

Led Solar Road Stud is very practical. Because there is no electricity in the suburbs, the safety of highways and rural roads cannot be guaranteed. Then the Solar Road Stud, which has used solar energy as an energy source, can provide a sense of safety, allowing drivers and pedestrians to see the situation on the road.

G105 road studs are resistant to high temperature, low temperature and high pressure. Very environmentally friendly and practical.Solar Road Stud is controlled by a clock to start and stop. It works regularly at night. After the smart solar module stops working, the self-luminous material continues to light up to serve as road signs and guide the way.

It is a comprehensive enterprise engages in producing, R&D, and solving problem of various traffic safety products. The main products of RUICHEN group include solar road studs, reflective road studs, solar traffic signs and road marking machines.Our solar road studs are of high quality and strong enough to withstand pressure of 30-40 tons, with flashing or constant mode, and 5 colors for your choice.Solar road studs can be commonly used in areas where traffic accidents occur frequently, and can also be used as temporary lighting equipment.

Solar Road Stud or Solar Road Marker is a kind of Solar Roads. It is set along the road surface and used at night or in rain and fog to indicate the direction of the road. It is composed of retroreflective materials, shells, solar panels, LEDs, and control devices.

An important part of the intelligent pedestrian crossing system is the solar road stud. The ground lights on the zebra crossing will change with the pedestrian crossing signal lights. When the signal light is red, the ground light is also red, and the signal light is green.

It is the solar road studs industry that sells solar road stud products at the same time as the live broadcast. Its form is constantly changing. The reason for the emergence of live sales of solar road studs is e-commerce. The rise of solar road studs caused some manufacturers in the solar road studs manufacturing industry to follow up and evolve.

The material may be ABS, AS+ glass fiber, etc., with high compressive strength. It is generally called all-plastic Solar Road Stud. The plastic shell means that the shell is plastic. , The interior is filled.

To purchase Solar Road Studs online, you can search for the keyword Ruichen Solar Road Studs through Google, and come to the official website https://www.rctraffic.com/, there will be professional business customer service to answer questions at the first time.

The solar panel is used to charge the battery. When the light is sufficient, the solar panel generates current and voltage under the light to charge the battery.

It is characterized in that: the said GPS solar road stud sensing synchronous flashing warning light has two working modes, one is a vehicle sensing working mode, and the other is a weather sensing working mode.

Henan Ruichen Traffic Equipment Co, Ltd. is a professional manufacturer of solar road stud.It is a comprehensive enterprise focusing on the research and development.

Road studs on city roads, factory road road studs, parking lot road studs, underground garage road studs, campus road road studs.

Solar road studs are divided into embedded (buried) and pasted types. A special AB glue is used to evenly sprinkle on the back of the road stud to clean up the sand on the ground and stick it tightly on the road surface.

Reflective road studs for highways, including a transparent shell and a reflector, the shape of the transparent shell is hemispherical, the bottom plane edge of the transparent shell extends outwards with flanges.

Henan Ruichen Traffic Equipment Co, Ltd. The main production of “line” in the class of “tempered glass reflective projection road sign (also known as eye or cat eye)”,solar Road stud wide functional.

Henan Ruichen Traffic Equipment Co, Ltd. The main production of “line” in the class of “tempered glass reflective projection road sign (also known as eye or cat eye)”,solar Road stud wide functional.

Henan Ruichen Traffic Equipment Co, Ltd. is a manufacturer integrating production and sales, with a daily output of 300,000 sets of solar road studs.

Henan Ruichen Traffic Equipment Co, Ltd. installs solar road studs on highways in some foreign countries, and uses the work of solar road studs to warn drivers, effectively avoiding the threat of fog.

Road safety, road construction, new energy transportation, smart transportation.

The installation of solar road studs is a technology.- Henan Ruichen Traffic Equipment Co, Ltd.

Solar road studs are very energy-saving and environmentally friendly. – Henan Ruichen Traffic Equipment Co, Ltd.

About RuiChen traffic equipment manufacturer.

Plastic shell road stud refers to that the shell is made of plastic and the interior is filled.

Cast aluminum shell means that the shell is cast aluminum and the interior is filled. The cost of such a road stud is lower than that of full cast aluminum, but at the same time the compressive strength is not so high. It is generally called cast aluminum road stud or cast aluminum filled road stud.

The utility model relates to a single-sided road stud light, which comprises a main body, a filler and a reflective sheet. The shell is a regular quadrangular pyramid structure. A hand groove is symmetrically formed, and the hand groove has a circular arc structure, the shell is completely filled with fillers, and the lower end plate of the shell is provided with a plurality of through holes at intervals.

Henan Ruichen Traffic Equipment Co, Ltd. Professional manufacturer of solar road stud. It is a comprehensive enterprise focusing on the research and development, production and sales of solar photovoltaic road traffic safety facilities and related conventional traffic equipment.

Solar Cat Eyes, also known as raised pavement markings, road studs,Bots Point, Cat Eye, or Road Turtle. RUICHEN TRAFFIC is recognized as a leading manufacturer and supplier of various cat eye nails, Solar Cat Eyes, reflective nails, glass nails and aluminum raised pavement markings. All RUICHEN Solar Cat Eyes are remote distance and high pressure resistant. It has also passed ISO9001:2000, CE and RoHS certification.

Double-sided Solar Road Stud, with the perfect function on two-way roads. Three fixed or flashing LEDs on each side of the Solar Road Stud are powered by photovoltaic cells and equipped with large capacity rechargeable batteries. Solar Road Stud automatically start the system at dusk. Made of aluminum. The LED can choose from either unilateral or bilateral.

Solar Pavement Marker is made of high quality aluminum alloy, conforming to Class ASTM D788 8 requirements. The lenses adhere to the inreflective prism surface to provide extremely durable surfaces resistant to constant wear. Unlike other signaling materials, the Solar Pavement Markers can significantly improve visibility in water and / or dense fog under day and night driving conditions, defining lanes in addition to providing audible alarms.

Road Stud Light adjust the pressure applied as the vehicle passes to cushion the shock. Can withstand up to 30 tons. Equipped with super-large waterproof solar panels. The reflector is embedded in the aluminum shell to prevent it from breaking up during impact.
This solar Road Stud Light is available on one side and side beads. The reflectors are white, red, green, blue and yellow.

Solar Road Studs are glowing markers outline the highway and path at night. Solar road studs have ultra-bright LED lights in various colors. These Solar Road Stud are strong enough to carry 20 tons of cars that are used on particularly dangerous roads. They store energy during the day and can shine for over 100 hours in the dark.

RUICHEN solar road studs lights are designed to accommodate alternatives to existing road / street brick, remodeling, incandescent lamps. solar road studs lights are used for solar powered decorative or traffic flow purposes. solar road studs lights are safety functional transportation facilities widely used worldwide. LED lights on studs have strong brightness in good weather conditions and are easily visible at a distance of about 900 meters, effectively reducing traffic accidents.

RUICHEN This Led Road Stud has one or two ways of reflective plastic. Light emitting strength of 5,000 mcd. high quality aluminum housing, durable solar cells enable us to guarantee Led Road Stud one year uninterrupted lighting. Provide all colors, working mode of Led Road Stud is flashing or stability. Provide one year warranty, service life lasting 2 to 3 years under normal conditions.

Solar Cat Eyes road stud are made of polycarbonate and polysilicon, and “new” reverse-reflective Solar Cat Eyes are made of aluminum alloy, all of which can withstand 20 to 30 tons of PSI and operate in extreme weather conditions. These Solar Cat Eyes are very effective in illuminating remote dark areas with limited or no electricity available.

RUICHEN Led Road Studs are assembled using the best available components and the housing is made of sturdy alloy aluminum castings, including unbreakable polycarbonate panels, plus the latest LED, solar and energy storage technologies. We are confident in the durability of the Led Road Stud, so we offer an unprecedented 2-year warranty for each unit.

RUICHEN Solar Cat Eyes provide all-night lighting from dusk to dawn that clearly defines sidewalks or bike paths. This premium Solar Cat Eyes is at the forefront of solar technology, offering supercapacitors instead of batteries as power storage, extending service life to more than 5 years. Choose from a variety of colors and static or flashing modes.