led road studs

Blinking Led Road Stud Lights Bridge Solar Road Markers, as the name suggests, are a kind of traffic roadblock guidance method, used to guide people to go or drive in the correct direction, prevent speeding and traffic accidents; Blinking Led Road Stud Lights Bridge Solar Road Markers is mainly used in urban roads and regional high-speed networks to facilitate installation and use along the road surface.

Large luminous brightness of Solar Road Markers Path Road Stud£ºThe reflective brightness of ordinary reflective road studs is only 300-400 MCD, while the luminous brightness of Solar Road Markers Path Road Stud can reach more than 2000 MCD, which is 6-7 times that of the former. High-intensity light can penetrate rain and fog at night, which is safe and effective. Provide directions for the driver.

Due to the continuous development of solar cell technology, in recent years, in the highway and road safety protection projects implemented by the country, various high-tech traffic safety facilities and products have been favored by the industry. The wide application of these traffic safety facilities and Road Markers has played an important role in improving the safety of pedestrians and vehicles on highways and roads, and reducing the occurrence of traffic accidents. In various traffic safety facilities or products,Road Markers can clearly delineate the contours and edges of the road in rain, fog and road bends, induce the driver¡¯s sight, interact with the vehicle information, and eliminate road problems. Security risks.

At night or in rainy and foggy weather, indicating the direction of the road, etc., Solar Road Markers is composed of retroreflective materials, shells, solar panels, LED light-emitting tubes, information collection, car networking communication and control devices, with active light-emitting and passive light-reflecting performance luminous induction instructions , Solar battery charging, sensory information collection module, car networking communication, integrated intersection signal light linkage “five in one” visual guidance traffic safety function, usually Solar Road Markers combined with signal lights, guidance screens, signs, markings, signs, etc.

According to different installation positions, Flashing Led Road Stud Lights Urban Road Raised Pavement Marker can be divided into buried and protruding types. The former is generally used in the center line of the road, and the latter is generally used in the edge of the road. This is because the Flashing Led Road Stud Lights Urban Road Raised Pavement Marker installed on the center line of the road require high pressure resistance. In order to solve this problem, the Flashing Led Road Stud Lights Urban Road Raised Pavement Marker had to be buried in the ground, and only about 5 millimeters of the ground was exposed. The smart road studs used on the edge of the road do not require too much compression performance, and they can still work effectively when protruding from the ground.

Since the solar synchronous Raised Solar Road Stud works in a synchronized flashing mode, Raised Solar Road Stud is usually used as a road sideline, green belt marking, deceleration sign, obstacle indication, etc.

Speaking of the working principle of Highway Solar Road Markers, here are the following:During the day, solar panels absorb sunlight, convert solar energy into electrical energy, and store it in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) to make LEDs emit Bright light draws the outline of the road and induces the driver’s sight.

Henan RUICHEN Transportation Co., Ltd. is a professional road stud manufacturer integrating R&D, production, sales and service. Solar Road Markers Heavy Duty Road Spike are designed for marking crosswalks, roundabouts, traffic islands and more.

According to the different energy storage components, Highway Led Road Stud Light can be divided into capacitive type and battery type. The service life of the former can be up to five to seven years, and the service life of the latter can generally range from one to three years. Since embedded Highway Led Road Stud Light can damage the pavement greatly, and the cost of capacitive smart road studs is too high, the most widely used battery Highway Led Road Stud Light is currently.

The specification structure of Amber Led Road Stud Lights Park Raised Road Markers is generally 100mm¡Á100mm¡Á20mm, and the height is no more than 25mm. Amber Led Road Stud Lights Park Raised Road Markers has many types of reflectors, including reflectors, reflective beads, infrared light, reflective films, etc.

The Solar Road Markers Pedestrian Crossing Road Spike are made of active lighting LED light sources and can work completely autonomously for years. All products have unique shapes, patent certificates, etc. Thanks to this technology, Henan RUICHEN Solar Road Markers Pedestrian Crossing Road Spike have the highest level of lighting (durability) without the need for expensive wiring installations.

In the future intelligent vehicle road collaborative management and control, Park Led Road Stud Light can use functions such as vehicle and pedestrian information collection, data transmission, and Internet of Vehicles communication, including integrated vehicle flow detection, photosensitive detection, vibration detection, temperature detection, and monitoring. The road operation status and information can be grasped and understood in time to realize V2I traffic information interaction and integrated traffic signal control facilities. Park Led Road Stud Light is the basic equipment for the digital transformation of the next generation of intelligent networked facilities.

Solar energy generates eco-friendly electricity from sunlight. Therefore, these high-quality Solar Road Markers Park Road Marker Heavy Duty Road Spike can operate independently on the outside and are completely maintenance-free, saving time and effort.

The innovative design of Solar Road Markers Path Cat Eyes is made of the highest quality stainless steel or PC, making our solar roofs resistant to compression and improving road safety.Solar energy generates eco-friendly electricity from sunlight.

Active lighting, dynamic warning: Solar Road Markers Pedestrian Dock Light flash at a second-level frequency at night, and human vision is more sensitive to changes, so its dynamic warning effect is very strong. Active lighting can not only avoid the interference of rain and fog to the greatest extent, but Solar Road Markers Pedestrian Dock Light also can break away from the dependence on car lights, and the visual distance is longer and the effect is better.

Solar road studs are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centrelines. Embedded in the road surface, Solar Road Studs are an electronic improvement on the traditional cat’s eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices.

Road Stud Light characteristic
-Easy to install
-Solar panel, low power consumption
– High luminous intensity
-Anti-high temperature (low temperature)
– Long service life
-Transparent epoxy crystal design
Ultra-thin design, only 20mm from the ground
Six or twelve 08mm LEDs provide visual warning lights

The main features of High Quality Solar Road StudSpecial flexible solar cells can withstand maximum tire impact.Special flexible solar cells do not break after a violent impact. The weight is more than 20 tons.The mirror is inserted from the inside and is well protected by the aluminum shell.

These Solar Pavement Markers are naturally charged by the sun. Once the sky darkens, the LED lights in the Solar Pavement Markers automatically light up for up to 10 hours a night. They are designed with special emphasis on road safety and can help prevent serious accidents and emit rather than reflect light.

Compared with traditional lighting systems, Customize Solar Road Stud reduce light pollution by about 50% and consume less energy than conventional energy systems. LED lighting can be directly aligned to where lighting is required, reducing the total energy requirement.

New Solar Pavement Markers work By absorbing solar energy, solar panels can be converted into electricity and stored in energy storage devices such as batteries or capacitors during the day, while the electrical energy inside solar cells can be stored in solar cells. Energy storage devices can be converted into light at night and can be controlled by photoelectric switches.

Led Road Stud is an innovative energy solution that improves visibility and road safety and provides lighting for roads and other areas.
Please check our company’s website for features and technical specifications

Customize Solar Road Stud can be used for sharp bends, dangerous bends, pedestrian crossings/shelters, concrete traffic islands, intermediate/segregation zones, bike lanes, deceleration zones, combined lanes, roundabouts, guardrails, narrow bridge “KEEP KEEP” intersections, and more.

We are the manufacturer and overall sales supplier of Road Stud Light in China. Our Road Stud Lights are widely used as road reflectors. We are a supplier of solar street lights and road stud reflectors, which are widely used on highways and airports. Our nails are widely used at airports.

High Quality Solar Cat Eyes can improve the driver’s effective warning distance. Flashing models “mark” the driver’s attention and can help slow down.Helps reduce pedestrian and vehicle accidents due to adverse weather conditions, such as rain or fog, which can make road routes and other road safety features virtually invisible at night.High Quality Solar Cat Eyes can be seen from one kilometre away, so they can help the driver adjust to a safe speed and reduce the likelihood of an accident.

New Led Road Stud sign is a low-cost, independent, solar-charged LED lighting signpost. New Led Road Stud can be used to reduce speed and alert drivers to common features, hazards and dangerous corners on our roads. New Led Road Stud cannot replace reflective elevated road signs (RRPM) but can be used as a new high-tech alarm device.

The Raised Led Road Stud reflector adopts a built-in installation design, which will never fall off, and is bonded with the shell by epoxy resin glue, which has good waterproof performance.Raised Led Road Stud is a very effective urban beautification, anti-fog guidance, and road marking strengthening technical means.

The Raised Led Road Stud adopts a built-in installation design, which will never fall off, and is bonded with the shell by epoxy resin glue, which has good waterproof performance. Raised Led Road Stud is a very effective urban beautification, anti-fog guidance, and road marking strengthening technical means.

Ruichen Raised Road Stud are sealed and filled with epoxy resin to seal the control board,Raised Ruichen Road Stud do not use easy-to-melt hot melt glue, and have good compressive strength after curing

The embedded wireless Raised Led Road Stud is controlled by wireless signal, and Raised Led Road Stud flashes uniformly, which ensures the alertness and improves the visual comfort.

Raised Solar Road Stud emit warning lights through LEDs to warn drivers to slow down or stop and wait. At the same time,Solar Road Stud remind pedestrians to pay attention to vehicles at intersections to improve the safety of pedestrians crossing the road.

Solar synchronous road studs means that the discretely installed Raised Road Stud Lights use a uniform flashing frequency and duty cycle, and work synchronously in a coordinated and unified state. Raised Road Stud Light can display the direction of the road and the location of road obstacles with the best visual effects.

The working principle of Raised Solar Road Stud: during the day, solar panels absorb sunlight and convert solar energy into electrical energy and store it in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (through photoelectric switches). Control), the outline of the road is drawn through the bright light of the LED, and the driver’s sight is induced.

The visible distance of Ruichen Raised Road Stud at night exceeds 800M. The main product types ruichen Raised Road Stud include bulletproof PC shells, one-time die-casting cast aluminum shells, tempered glass shells, etc. The internal structure is mainly composed of LED lamp beads, batteries, solar energy and controllers.

Solar wireless synchronization road studs, Raised Solar Road Studs that can be installed discretely, flashing synchronously, Raised Solar Road Stud can display the road direction and the location of road obstacles with the best visual effect, without the need for additional controllers.

Raised Solar Road Stud with reflective sheets are mainly composed of retro-reflective materials, shells, solar panels, LEDs, and control devices. Raised Solar Road Studs are visual induction facilities with active and passive reflective properties, usually combined with markings.

Generally, Raised Road Stud have five colors of red, yellow, white, blue, and green. Raised Road Stud Lights working modes are mainly steady and flashing. Raised Road Stud can also be loaded with Bluetooth module and GPS module to achieve synchronous flashing, chasing flashing and other operating modes.

Raised Led Road Stud can correspond to a variety of Internet of Things interfaces, Raised Led Road Stud also can be connected to high-definition thermal imaging cameras, geomagnetic sensors, traffic light signal systems, etc.

Since the solar synchronous Raised Solar Road Stud works in a synchronized flashing mode, Raised Solar Road Stud is usually used as a road sideline, green belt marking, deceleration sign, obstacle indication, etc.

Raised Led Road Studs are also called solar synchronous protruding road signs and solar co-channel studs. The Raised Led Road Stud can be designed with single-sided or double-sided light emission

After the solar road stud is connected to the Internet of Things, the device sends a control signal and transmits it to the Raised Solar Road Stud controller, and the Raised Solar Road Stud flashes. The flashing frequency can be adjusted according to customer requirements, generally from 2HZ to 4HZ.