reflective studs

Reflective Studs damage is mainly caused by insufficient strength of the materials used in Reflective Studs. Reflective Studs will be subjected to static pressure load and impact load during actual use. The static pressure load is mainly formed by the tires pressing on the Reflective Studs when the vehicle is stationary; the impact load is mainly generated when the tires run over the Reflective Studs while the vehicle is running.
　　Improving the static compressive strength of Reflective Studs is mainly achieved by increasing the strength of Reflective Studs. At present, the Reflective Studs sold on the domestic market are divided into metal Reflective Studs (such as aluminum stud body Reflective Studs) and engineering plastic Reflective Studs (such as polycarbonate, polyacrylic acid and other materials). ) And mixed material Reflective Studs (such as road studs with engineering plastic shell + quartz sand filling). Among them, Reflective Studs made of metal have the highest compressive strength, followed by Reflective Studs made of engineering plastics and mixed materials.

First, use a ruler to determine the installation position of the Road Studs, install a Road Studs at 15m, (install according to the drawings), ensure that the positions are longitudinally in a straight line, and at the same time horizontally aligned left and right. The installation distance shall be subject to the design requirements.
The ratio of glue is 1:0.7 glue A and glue B, and then add 15%-30% cement as a filler (the glue is not easy to mix too much at a time, enough for one person to glue 50-70 road studs). The colloid should be stirred evenly, and the color (hand electric drill with agitator) should be consistent. Each road stud needs about 40-50 grams of glue for bonding.

In addition, based on the analysis of the failure causes of Road Studs, it is proposed to Road Studs that the body of Road Studs must be made of a single material, which has good compressive strength and impact resistance. The shape of the Road Studs should be able to meet the bonding strength with the road surface or effectively reduce the lateral shear force that acts on the road studs when the vehicle is rolled: The Road Studs sheet must have a wear-resistant coating: The reflective structure of the Road Studs sheet can effectively prevent Road Studs The impact of local damage of the film on the overall brightness of the reflective film and other requirements.

It is a comprehensive enterprise engages in producing, R&D, and solving problem of various traffic safety products. The main products of RUICHEN group include solar road studs, reflective road studs, solar traffic signs and road marking machines.Our solar road studs are of high quality and strong enough to withstand pressure of 30-40 tons, with flashing or constant mode, and 5 colors for your choice.Solar road studs can be commonly used in areas where traffic accidents occur frequently, and can also be used as temporary lighting equipment.

Solar Road Stud or Solar Road Marker is a kind of Solar Roads. It is set along the road surface and used at night or in rain and fog to indicate the direction of the road. It is composed of retroreflective materials, shells, solar panels, LEDs, and control devices.