solar road stud

What should I do if the solar stud light doesn’t turn on? This is undoubtedly a question most customers want to ask. If this problem really occurs, the first thing we need to do is to check whether the indicator light of the battery is on. If it is not on, it may be that the connection line between the controller and the battery has fallen off.

Especially in rural areas, especially the various facilities are relatively incomplete, so solar stud lights are undoubtedly the best choice. But no matter what kind of lighting, there will be some unforeseen problems. So what are the problems with solar stud lights? How should we solve them?

The development of Ruichen solar stud lightss is getting better and better, gradually replacing traditional street lights. Because it is energy-saving and environmentally friendly, as well as manpower and material resources, solar stud lightss are very popular in both urban and rural areas.

Working principle: Solar Road Studs uses solar panels to receive solar radiant energy during the day and convert it into electrical energy and store it in the battery through the discharge controller. At night, when the illuminance gradually decreases, the charging and discharging controller will act after detecting this value.

Wide application: Solar Studs uses natural solar energy, so it can be used wherever there is sunlight. It is especially suitable for green space landscape lighting equipment, high-end residential and outdoor lighting, tourist attractions and coastal landscape lighting and decoration, industrial development zones, industrial and mining Corporate street lights, outdoor lighting for universities and colleges.

High taste: Solar Studs technology products, green energy, the user unit attaches importance to technology, green image improvement, and quality upgrade. Low investment: Solar Studs’ one-time investment is equivalent to AC power (the AC power investment starts from the transformation, power supply, control box, cable, and engineering), which is one-time use and long-term use.

1. Energy saving: Solar Studs uses solar energy photoelectric conversion to provide electricity, which is inexhaustible.
2. Environmental protection: Solar Studs is pollution-free, noise-free, and radiation-free.
3. Safety: Solar Studs has no accidents such as electric shock or fire.
4. Convenience: Solar Studs is simple to install and does not require wiring or “opening and digging”, and there is no concern about power cuts.
5. Long life: Solar Studs products have high technology content, and the control system is an international brand, intelligent design, and reliable quality.

Solar energy is inexhaustible. The solar radiation energy received on the earth’s surface can meet 10,000 times the global energy demand. As long as solar photovoltaic systems are installed on 4% of the world’s deserts, the electricity generated can meet global needs. Solar power generation is safe and reliable, and will not suffer the impact of energy crisis or unstable fuel market.

The integrated design of the light pole and the battery assembly has the ability to resist wind. The interior uses intelligent charging and discharging and microcomputer light and time control technology. Solar Studs products are designed with high-efficiency lighting sources, with high brightness, easy installation, stable and reliable work, no cables, no conventional energy consumption, and can be used for more than 50,000 hours, so they have the characteristics of long life.

Solar Studs is a street lamp that uses solar energy as energy. Solar Studs uses solar energy as electrical energy to provide night road lighting. It can be installed on the spot as long as the sun is sufficient. It is called a green product because it does not pollute the environment.

Road Stud lawn lights are generally low-voltage products, using DC 4V or 6V power supply, safe and harmless, and will effectively protect children, pedestrians and animals.
Well, there is a question about the difference between the Park Road Stud lawn lamp and the Cats Eyes Road Stud lawn lamp. Ruichen will explain it here. In fact, the Road Stud lawn lamp is also a kind of lawn lamp, but its brightness, height, etc. There is a difference between the club and the lawn lamp. You can also go to the park to conduct a field survey.

Road Stud lawn lights have very high requirements for quality. Manufacturers must choose very advanced equipment, good materials and to ensure quality, and they must conduct a comprehensive inspection of the materials to grasp the quality of each production process and the inspection of the finished product.Shipment inspection, but also in strict accordance with the requirements of the ISO quality management system for total quality management.

The overall life of the Road Stud lawn lamp is designed to be more than 20 years. It uses a high-transmitting glass lamination process. The design life of each accessory is consistent. The unique energy-saving design makes the battery life longer than conventional technology. 2 ,3 times.

If it is a solar Road Stud lawn lamp, usually a full-power crystalline silicon solar cell module is used as the power generation system of the lamp, and a special solar battery is used, which is very energy-saving and energy-saving, and it can be continuously illuminated even in rainy days. 3- 5 At night, no other energy supply is needed.

It is used for the lighting facilities around the lawn and is also a very important landscape facility. Its light is very soft and not as dazzling as the lawn lamp. The installation of the Road Stud lawn lamp is very convenient, and the decoration performance will be relatively strong. Generally, it can be used in public places such as walking side, lawn surrounding, parking sound and square.

In fact, the types of Road Stud lawn lights in the park include lawn lights. If you want to distinguish between the two, the biggest difference is that the height of Road Stud lawn lights is lower than that of lawn lights, and the brightness is generally not grass. The brightness of the lamp is high. The Road Stud lawn lamp is an energy-saving and environmentally friendly lamp.

In terms of related aspects, there are many types of Road Studs nowadays, which are too many to count, let alone have a certain understanding of this type of Road Stud. And when we put aside the hard work of the day and go out for a walk in the park, we are often attracted by the Road Stud lighting set in the park.

In fact, people’s living standards and quality of life have also been improved in all aspects, so the supplies in life have also been divided very carefully. The products we use in different scenarios are also somewhat different, such as in Road Stud.

Ruichen said that Road Studs will change every few years, so they can be gradually replaced by smart Solar Road Studs. Smart Solar Road Studs need to be replaced every 7 to 10 years, which may coincide with the scheduled road resurfacing.

Rigorous quality
a. Solar Stud Signs, using the 3M brand of reflective film to ensure good retroreflective performance, is a 3M digital electro-engraving gold medal processor;
B. The LED light source and PCB circuit boards are all produced in large-scale factories, and the patch is completed by the supporting factories of CRRC.
c. Solar Stud Sign, Ruichen Group has accumulated ten years of production experience. We select materials for quality excellence, so that quality and design are equally exciting. We professionally produce various transportation facilities. We have our own factory and only provide good quality services.

Ruichen Solar Stud Sign is produced in accordance with GB/T31446-2015 “LED Active Luminous Road Traffic Signs”, JT/T750-2009 “Interior Lighting Signs”, and T/CSIA001-2018 “Panel Display Active Luminous Traffic Signs”. Type inspection (or sampling inspection) qualification report and aging test report (according to standard requirements) issued by a national-level traffic safety facility or product testing organization.

Ruichen Solar Stud Sign can be equipped with solar panels for power supply, no special wiring is required, flexible installation location, quick and convenient installation, saving construction costs, and no energy consumption.

Through the combination of Road Stud Light and sculpture, installation art, graffiti art, stage art, terrain, etc., to create novel and imaginative sensory enjoyment. The use of lights to create the atmosphere of a scenic spot must not only conform to traditional aesthetics, but also reflect the future-oriented feelings of modern scenic spots.

Road Stud Light lighting in the same space should be in a harmonious state, and multiple colors should not exist at the same time; use light colors with better color rendering to make objects with good shapes, rich textures, and affinity appear authentic.
　　The excellent scenic Road Stud Light design can use lighting to increase the nighttime fun, while the mediocre lighting design is unremarkable.

Scenic Road Stud Light uses lights to create the artistic conception of the scenic spot
　　 If the light of the landscape creates the formation of the night space of the landscape, then the color of the light puts a warm coat on this space. The emotions expressed by the lights of different colors are different in warmth, coldness and severity, and the lights of different colors are used to create spaces with different atmospheres

Road Stud Light space of night scene uses the superposition, flow, translucency, refraction and other characteristics of light to carry out secondary design of the daytime space of the scenic spot;
　　 Break the inertial idea of ​​arranging the light and dark space relationship of light according to the importance of conventional landscape nodes, and create more delicate light effects for secondary nodes

Road Stud Light space design in the scenic spot has a sense of hierarchy
　　 Scenic Road Stud Light function should be clear, the bright place should be bright, road signs, corners, roads, obstacles, important landscapes;
　　 to ensure safe use, no high temperature contact, obstruction of travel, misleading people flow, falling off lamps and other dangers.

The emotional hue factors must be handled appropriately, avoid abuse of hue and the use of colorful and colorful lighting. At present, there are still some misunderstandings in the lighting design of landscape Solar Road Stud. It is believed that the landscape Solar Road Stud lighting should pursue bright effects.

Therefore, the Solar Studs lighting plan of the scenic spot should highlight the key points, beautiful appearance, energy saving and environmental protection, appropriate illumination, economic and safe.
　　Accurately grasp the choice of Solar Studs light source, adopt Solar Studs with good heat dissipation effect, good brightness stability and long life. On the premise of meeting the functional requirements, low-consumption, energy-saving, and environmentally friendly lighting facilities that conform to the national energy development strategy can be used.

Solar Studs lighting planning for night tours in tourist attractions will help to vigorously develop the construction of scenic cultural tourism, combining creativity, technology, and art, integrating nature, lighting, and people into one, focusing on the interaction between people and the environment and works, and bringing tourism to the audience. Sightseeing value and operating income, thus triggering a new form of night tourism and huge commercial value.

The environmental adaptability of Solar Stud is a comprehensive test of its mechanical and electrical properties, involving structural design, circuit design, electronic device performance and other aspects, even including its production process. This also requires all aspects of work to be done in order to ensure that Solar Stud has better environmental adaptability.

As of 2014, the Ministry of Transportation’s temperature requirements are within the range of -20°C to 85°C, and three cycles of tests between 20°C and 60°C are required to see if it can meet the requirements of the environment. The requirement of the Ministry of Communications for the damp and heat performance of Solar Stud is that it can still work normally after 48 hours of testing under the conditions of 45°C and 98% relative humidity.

The use environment of Solar Stud is complex and changeable, and the temperature and humidity may be very different. The temperature in the north is very low in winter, the temperature in the south is very high in summer, the temperature difference between day and night in the northwest is particularly large, the southeast is humid, and the northwest is dry. These will affect whether the solar road stud works normally, so the design of Solar Stud should fully consider the environmental adaptability.

Placed for 8 hours under standard test conditions, the rated capacity of the capacitor can generally only meet the needs of the road stud to emit light for 12-14 hours. Therefore, the capacitive Solar Road Studs has very strict requirements for the actual use environment, not only the sunlight must be enough Strong, and there can be no continuous rainy weather, otherwise it will be difficult to work normally.

This must also be paid special attention. If the battery matching performance is not good, there will be insufficient battery storage power in the rainy weather, causing Solar Road Studs to fail to emit light. In this way, Solar Road Studs has no practical value and cannot be used at all. This is the limitation of capacitive Solar Road Studs.

Solar road stud price with smooth edges,solar road stud it is no harm to the tires and could extend the wheels life span when the car run over many times.

The solar road stud adopts full sealant technology with high compressive strength and IP66 waterproof performance. It still works well even on roads with plenty of rain.

During the day, the solar spikes convert solar energy into electricity through solar panels, which are stored in built-in lithium batteries. Bright red and yellow traffic cones also attract attention. At night, the solar road studs automatically flash, and the traffic cones reflect off the reflective material. Drivers can spot warning signs in the distance and pay attention to avoidance.

Solar road studs have these advantages (shock resistance, waterproof, strong ability to absorb sunlight, interlocking design, strong legs) and can be installed in any place with poor sunlight, cloudy and rainy days, and heavy vehicles.
Solar road studs are widely used in the European Union, the United States and other countries.

Solar Road Stud Features:
Solar power supply, more environmentally friendly.
Build-in light source sensor, automatically light up when it turns dark, more convenient.
Solar Road Stu 20 tons bearable pressure, high shock resistance.
Effectively guide vehicle and pedestrian to right direction.

The solar cat-eye road stud shell adopts a novel design scheme, with feet under the bottom of the shell, solar cat-eye road stud which can be more strongly adsorbed to the ground when doing the surface-mounted installation.

The solar road stud is charged in direct sunlight, which has the characteristics of energy saving, environmental protection and low carbon. LEDs and reflectors are better for warnings. Choice comes in five colors. Solar Road Stud Applicable: Road Indication Ground Lighting Road Edge Warning Road/Park Reminder Decoration

The reflective brightness of solar road studs, the reflective brightness of ordinary reflective road studs is only 300mcd to 400mcd, the reflective brightness of solar road studs can reach 2000mcd 6 times to 7 times that of ordinary reflective road studs, and the lamp beads exceed 6000CMD.

The Solar Road Stud Traffic operates on its own in low light conditions and dark environments, it is solar powered, and the light has a solar panel to recharge the included battery. The built-in light-sensing module automatically detects the dimmed light and starts flickering.

Solar road stud products use sunlight and LED as light source, which have the characteristics of energy saving, environmental protection and convenient installation. The solar road stud adopts independent power supply and automatically illuminates at night.

Solar road studs are not only safe, but also beautiful in appearance. At night, it is like a necklace that can dress up a city and a road. The visible distance of solar road studs can reach 800 meters. The newly developed special hybrid glue has excellent anti-corrosion properties, which can protect the reflector from corrosion.

We supply and export solar road studs with reasonable prices. Solar road studs are lighting devices with flashing LED lights that are widely reused in road construction to delineate the centerline and edges of roads. They’re like traditional cat’s eyes, giving the driver a 30-second window to react, compared to 3 seconds with the various reflex devices used previously. Bright LED lights make the device easy to see from a distance of about 900 m.

Solar road studs are not only safe, but also beautiful in appearance. At night, it is like a necklace that can dress up a city and a road.

Solar road stud you can control the switch before you install it so as not to consume too much energy during the delivery.The aluminum frame¡¯s special design makes the solar panels and reflectors get better protection Solar road stud low costs of installation, easily and quickly assembled in any location.

This solar road stud doesn’t require coring or drilling unless you prefer screwing in instead of adhesive…please note that to attach these you will need epoxy adhesive or heat sold separately Adhesive pads, due to the cost of solar road studs these markers are compared to standard markers, we may recommend adding 2 mechanical fixtures; this is not necessary if installed by a professional using proper installation methods.

solar cat-eye road stud With a mono solar panel and high-quality Ni-MH battery, this solar cat¡¯s eye road stud can automatically light up every night and automatically light off during the day.

1.Solar road stud with both solar LED and reflective lens, betterinduced effects
2.Solar road stud high-temperature resistance battery and circuit,can be used on the equator
3.Solar road stud visible on foggy and rainy daysCast aluminium shell make it more anti-pression
4.Solar road stud IP68, Highly water-proof
5.Solar road stud long lifespan, 3-5 years for NI-MH Battery type

These solar LED road studs are naturally charged by the sun. As soon as it starts getting dark the LED lights in the stud come on automatically each night for up to 10 hours. They have been specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light. Solar LED Road Studs are also known as solar raised pavement markers, solar reflective lane markers and solar warning devices.

Solar road studs: There are many no-go areas on the highway. The signs on the road alone cannot attract the attention of the driver. Especially at night when the lights are weak, it is possible to break into the restricted area if you are not careful. The combination of solar road studs and traffic cones can well attract the attention of drivers.

Solar road stud price with smooth edges,solar road stud it is no harm to the tires and could extend the wheels life span when the car run over many times.solar road stud the special mix epoxy filler and the reflectors¡¯ surrounding thicken aluminum frame can protect reflectors make the compression resistance ability more higher

The solar road adopts high-quality aluminum material and high-strength PC cover, and the compressive capacity of the solar cat-eye road stud lamp can reach 20 tons.
The reflector is available in five colors (yellow, white, red, blue, green), you can choose according to different places.

Placed for 8 hours under standard test conditions, the rated capacity of the battery should meet the requirements of the road studs for 72 hours of normal light; even if the sun illuminance is less than 1000LX, the battery’s rated capacity should meet the requirements of Road Studs for 12 hours of normal light after 8 hours of charging Needs.

This is because the photoelectric conversion rate of monocrystalline silicon solar panels is high, about 14%, which can convert solar energy into electricity to the greatest extent to ensure the operation of Solar Road Studs. Time supply of energy. In addition, solar panels must be high-hardness, wear-resistant circuit boards.

Solar Road Studs solar panels directly absorb solar energy and convert light energy into electrical energy, which can be said to be the first link in the entire working system of Solar Road Studs; its working efficiency directly determines the working efficiency of Solar Road Studs. Monocrystalline silicon solar panels have been commonly used up to 2014.

Welding must be reliable, because Solar Road Studs bears the rolling and impact of vehicles every day, and a little looseness of the solder joints will cause the line to loosen and fall off. Therefore, when choosing welding torches and soldering tin, you must choose high-quality products to ensure that the solder joints are firm and reliable, and can work in a relatively “bad” environment for a long time.

The battery life must not only be long enough, but also be able to work normally in a larger temperature range. There are chemical substances inside the battery. If the temperature is too high or too low, the battery will not work. The battery operating temperature range of Solar Road Studs must meet the requirements of the actual use environment. The requirement of the Ministry of Transport is from -10 degrees to 50 degrees. The actual environment often exceeds this range, which places higher requirements on the battery.

An important factor that determines the life of Solar Road Studs is the life of the battery, and the choice of the battery is very important. There are two types of batteries on the market for reference as of 2014. One is that the battery capacity is reduced to 50% after 500 times of charging and discharging; the other is that after 1000 times of charging and discharging, the battery capacity is reduced to 79%.

Solar Road Stud actively emits light and clearly outlines the road outline; compared to Reflective Studs, one of its very important features is its high luminous intensity. This indicator is required by the Ministry of Transportation to be 2000 MCD.

If the Solar Road Stud is not completely sealed, it will naturally see water, which will cause a short circuit in the circuit, and the consequences are disastrous. Therefore, a qualified Solar Road Stud must pass the seal.
　　 There are several ways to improve the sealing performance of Solar Road Stud:
　　(1) Separate design. The LED lampshade and the internal circuit board adopt an isolation design. Even if the LED lampshade is broken, the interior of the Solar Road Stud is still guaranteed not to seep;
　　(2) Adopt strong neutral bonding material to ensure that the solar panel, LED lampshade and road stud housing are tightly bonded without any gaps between them.

There are several ways to effectively improve the compressive performance of Solar Road Stud: One is that the exposed Solar Road Stud uses PC bulletproof materials to enhance the compressive resistance of the electronic part; the second is to use IC control as much as possible to reduce electronic circuits. To reduce the pressure on the electronic part; the third is to design some stiffeners on the shell to share the pressure on the electronic part.

It is indeed not easy to make the electronic parts have a higher degree of compressive performance. Therefore, in general, the compressive performance of Solar Studs is better than ordinary ones. The nails are worse. As of 2014, the technical requirement of the Ministry of Communications is 10 tons.

Solar road stud price with Car lamp design reflector have widely lighting area and longer visibility .solar raod stud can be installed in any poor places with poor sunlight , rainy days,and a lot of heavy vehicles

The solar road stud working model has a solid or flashing option. This solar cat’s eye road stud can be a 2.4G or GPS-enabled flashing type, in which case all cat’s eye solar road signs will flash at the same time.

The solar road studs work by lighting or flashing LED lights, and the road warning effect is obvious. The solar cell adopts imported silicon cell with stable performance and high conversion efficiency.

The solar cat’s eye road stud adopts monocrystalline solar panels and high-quality nickel-metal hydride batteries, this solar cat’s eye road stud automatically lights up every night and automatically turns off during the day.

If Solar Studs cannot withstand a certain amount of pressure, it will easily break after the car is crushed or impacted, and naturally cannot work normally, so compressive resistance is a basic condition for Solar Studs to work normally. But the problem is that Solar Studs itself is an electronic product that contains electronic parts.

The application of solar LED road studs
1. Do not immerse in corrosive liquids, as this will damage the product.
2. Please do not scratch the surface of the solar panel with sharp objects.
3. Please place the solar panel facing up in direct sunlight to ensure the best photoelectric conversion effect.
4. Non-professionals, do not open the shell to avoid danger.

Solar road stud light function
1. Outdoor lighting for road lighting, yurts, tents, gardens, courtyards, parks, etc. Solar cast aluminum street light.
2. Rugged and durable, economical and practical, high-tech environmental protection, energy saving and emission reduction.
3. The charging mode adopts solar charging.

Solar road stud light
Application occasions and precautions of solar road stud lights
Use solar panels to charge the battery. When the sun is sufficient, the solar panels will generate current and voltage under the light to charge the battery. The battery outputs electrical energy to the load.

Solar Road Stud (Solar road cat eye) is also called solar cast aluminum road light, reflective markers, LED road stud lights, etc. It is charged by solar panels and stored in a battery. It will automatically emit light at night or in rainy and foggy weather when the light is insufficient. Guide the vehicle in the correct direction and effectively ensure traffic safety.

Starting from this problem and limitation, Ruichen Solar Road Stud has reconsidered and improved, and solved this problem by using innovative technology. The permanent solution is to use a device that can provide self-illumination to determine the road alignment as needed, without using the original reflection system, while still providing durability similar to the original system.

The Solar Road Stud is designed to replace the existing ordinary Reflective Studs. It works by the reflected light of the vehicle’s headlights. This existing system only limits the visible distance of the Solar Road Stud to the distance of the vehicle’s headlights, resulting in a limited visible distance at night or during a changeable climate and leading to multiple accidents

Ruichen Solar Road Stud evolution technology improves the performance of solar cells through battery energy storage. The main advantage of Ruichen Solar Road Stud is the use of microcontroller technology inside each stud, which can provide a variety of beneficial functions and control options even after installation.

Ruichen Solar Studs has been fully approved by the Ministry of Transportation. Due to its high-performance photovoltaic solar modules, Ruichen Solar Studs is very suitable for countries/regions with less sunshine. It has a sturdy structure, making it suitable for harsh conditions and ready to be used as a snowplow.

Ruichen Solar Studs are also stronger and more durable than traditional road studs, which means that their total cost is lower than Reflective Studs and their service life is longer. Ruichen Solar Studs only needs a few hours of daylight to provide enough battery power to last for several days-enough to ensure that the system operates throughout the year, regardless of the weather, anywhere in the world.

Ruichen Road Studs can increase the visibility of the road ahead by 10 times, and has reduced road accidents at its installation site by more than 70%. More importantly, since they are charged and activated by natural sunlight, they do not rely on headlight reflections. As a driver driving at a speed of 100 km/h, your reaction time to observe the road ahead is expected to exceed 30 seconds. This is a huge difference compared to traditional reflective road studs that only provide you with 3.2 seconds.

Solar Studs can be divided into capacitive type and battery type according to the different energy storage components. The service life of the former can reach five to seven years, and the service life of the latter generally ranges from one to three years.
　　Because the buried Solar Studs damage the road surface greatly, and the cost of capacitive solar road studs is too high, so the most widely used solar Studs is the raised battery.

Solar Studs can be divided into embedded type and protruding type according to different installation positions.
　　 The former is generally used in the midline, and the latter is generally used in the marginal line. This is because the Solar Studs installed on the centerline require particularly high pressure resistance. In order to solve this problem, the Solar Studs had to be buried in the ground, and only about 5 mm of the ground was exposed. The Solar Studs used on the edge line does not require particularly high pressure resistance, and it can still work effectively when protruding from the ground.

Solar Studs plays a very important role in delineating road contours in rainy and foggy weather and at bends, inducing the driver’s sight and eliminating safety hazards.
　　The working principle of Solar Studs
During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light draws the outline of the road and induces the driver’s sight.

Active light, dynamic warning
　　Solar Studs flicker at a certain frequency at night, and human vision is more sensitive to changes, so its dynamic warning effect is very strong. Active lighting can not only avoid the interference of rain and fog to the greatest extent, but also can break away from the dependence on car lights, and the visual distance is longer and the effect is better.

Features of Road Studs
　　High brightness
The reflective brightness of ordinary Reflective Studs is only 300-400 MCD, while the luminous brightness of Solar Studs can reach more than 2000 MCD, which is 6-7 times that of the former. The high-intensity light can penetrate rain and fog at night, which is safe and effective for driving. Guide the direction.

Solar Studs (Solar Road Stud or Solar Road Marker), is a kind of Road Studs, set along the road surface, used at night or in rain and fog, to indicate the direction of the road. It is made of retroreflective materials, shells, solar panels, LEDs , Control device composition, visual induction facilities with active light-emitting and passive light-reflecting performance, usually used in conjunction with markings.

Due to the continuous development of the solar energy industry, in recent years, various high-tech traffic safety facilities and products have been favored by the industry in the highway safety protection projects implemented by the country. The widespread application of these traffic safety facilities and products has played an important role in improving road safety and reducing traffic accidents. Among various traffic safety facilities or products, Solar Studs can clearly outline the contours and edges of the road in rain, fog and road bends to induce the driver’s sight, thereby eliminating road safety hazards. Solar Studs can play a very important role in delineating road contours in rainy and foggy weather and at corners, inducing the driver’s sight and eliminating potential safety hazards.

According to the function, it can be divided into:
1. Ordinary Road Studs; 2. Solar Road Studs; 3. Tunnel Wired Road Studs; 4. Wireless Road Studs.
According to the number of reflective surfaces, it can be divided into: single-sided Road Studs and double-sided Road Studs.
In no special circumstances, Reflective Studs refers to ordinary Road Studs.
So what are the characteristics of Solar Studs and how does it work?

The specification of reflective road studs is generally 100mm*100mm*20mm, and the maximum height does not exceed 25mm. There are many kinds of reflectors, including reflectors, reflectors, LEDs, reflective films, etc.
Classification of Reflective Studs:
According to the material, it can be divided into:
1. Cast aluminum Road Studs; 2. Plastic Road Studs; 3. Ceramic Road Studs; 4. Glass Ball Road Studs; 5. Reflective Bead Road Studs (divided into 21 beads and 43 beads, which can be combined into cast aluminum and plastic Road Studs )

Before installing the Solar Studs underground light, a hole should be dug according to the shape and size of the embedded part, and then the embedded part should be fixed with concrete. The embedded parts play a role in isolating the main body of the underground light from the soil, and to a certain extent guarantee the service life of the Solar Studs underground light.

Before installing the Solar Studs light, sort out the various parts and components used in the light. Buried Solar Studs lights are special landscape lights that are buried underground. Once they are installed, it is very troublesome to reinstall them with fewer parts, so they should be prepared before installation.

Solar Studs light is different from wall washer, projection light, point light source and other lights. It is a kind of light directly installed underground. The Solar Studs light body is made of high-purity aluminum alloy material, and the surface is electrostatically sprayed and cured at constant temperature. , Strong adhesion. Generally have good waterproof and dustproof properties.

Solar Road Stud light is a kind of landscape light with the light source installed underground. It is very common in urban lighting projects. It is usually used as a guide light on both sides of park roads or used as a Solar Road Stud indicator in parking lots. When installing this kind of Solar Road Stud light, it pays attention to the method, so what are the steps to install the Solar Road Stud light? Let’s take a look!

Generally speaking, when choosing a Solar Studs light manufacturer, we can consider from these aspects, comprehensively compare, and choose a more satisfactory manufacturer!
So what are the steps to install Solar Road Stud lights?

When choosing a Solar Studs manufacturer, you should prefer to choose a Solar Studs manufacturer with after-sales service, so that there is a certain guarantee. If there is no after-sales service, then such Solar Studs manufacturers are generally not recommended to consider!

The price of Solar Studs light is also an aspect that needs everyone to pay more attention to. You can compare the products of several companies to see in which range the price is more appropriate. I need to remind everyone that do not choose too cheap, so as to avoid quality problems, increase maintenance later.

For Road Stud light manufacturers, when choosing a manufacturer, we can measure from the following aspects:
　　 1. Manufacturer strength
　　 When choosing a manufacturer, it is better to choose a strong one, so that the quality of the product is guaranteed to a certain extent, and the production process is relatively mature.
　　2, Solar Studs product quality
　　 The laying and installation of Solar Studs is not a simple matter. Therefore, when choosing a manufacturer, you should choose a regular manufacturer with better product quality to avoid frequent replacement and maintenance work.

Road Stud lights are very important in the design of the city at night, especially in some scenic spots, parks and institutions and other places, such Road Stud lights can often be seen. Nowadays, many customers will directly connect with Road Stud light manufacturers, so how to choose Road Stud light manufacturers? Let’s take a brief look with the editor below!

The light emitted by Road Stud Lights at the bottom of the swimming pool is white or colored, with a variety of visual effects, and a variety of sizes to choose from. It is suitable for different swimming pools and can meet the needs of different customers.